• Extends the filter service intervals
• Recommended for extremely dusty conditions
• Washable

• Approvals: CCCUO_EU
• Colour: White

• Recommended for extremely dusty conditions

• Approvals: CCCUO_EU

• Consistent, high-level braking performance
• Perfect dosing capacity
• Visual highlight

• Perfect to use your rear wheels from your MY18-20 on MY21-.
• A 220mm brake disc is designed with 4 mounting holes to work on your bike when using MY18-20 rear wheels.

MY21- comes with an different rear wheel set up with a 6 bolt brake mount.

• Approvals: CCCUO_EU
• Diameter: 220
• Alignment: Rear

• No fading
• Outer ring made of stainless high-performance brake steel
• Minimal wear on brake pads
• Significantly longer lasting
• With Flame design for added braking performance

• Approvals: ABE
• Diameter: 220
• Factory Racing: USED BY FACTORY RACING
• Material (PowerParts): Stainless steel
• Alignment: Rear

• Minimal wear on brake pads
• Significantly longer lasting
• Full version for muddy track conditions

• Approvals: CCCUO_EU
• Diameter: 220 mm
• Material (PowerParts): Stainless steel

• Softer due to high content of organic substances
• Thermal insulation by means of ceramic underlayer
• Less aggressive brake feel
• Lower friction coefficient than sintered brake pads
• Special material mixture

• Approvals: CCCUO_EU
• Material (PowerParts): Organic
• Alignment: Front

• Significantly longer lasting
• Very high friction coefficient for maximum and permanent braking force
• Very good braking effect even in wet conditions
• For extreme operating conditions (sand, gravel...)
• Eliminates “fading” almost completely

• Approvals: CCCUO_EU
• Material (PowerParts): Sinter
• Alignment: Front

• Significantly longer lasting
• Very high friction coefficient for maximum and permanent braking force
• Very good braking effect even in wet conditions
• For extreme operating conditions (sand, gravel...)
• Eliminates “fading” almost completely

• Approvals: CCCUO_EU
• Material (PowerParts): Sinter
• Alignment: Rear

• Softer due to high content of organic substances
• Thermal insulation by means of ceramic underlayer
• Less aggressive brake feel
• Lower friction coefficient than sintered brake pads
• Special material mixture

• Approvals: CCCUO_EU
• Material (PowerParts): Organic
• Alignment: Rear

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Approvals: HOMNN_EU
• Number Of Chain Links: 124
• Chain Pitch: 428
• Colour: Gold

• Visual highlight
• Race look

• Approvals: HOMNN_EU
• Colour: Black

• Highest quality workmanship
• The right combination of look, style, and performance
• Specially designed for the challenges of off-road use
• Made from special, high-strength plastic for maximum stability
• With exchangeable chain track surface, therefore extremely durable

• Approvals: HOMNN_EU

• Race look
• Visual highlight
• With exchangeable chain track surface, therefore extremely durable
• Specially designed for the challenges of off-road use

• CNC machined out of teflon

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING

• With exchangeable chain track surface, therefore extremely durable
• Specially designed for the challenges of off-road use
• Visual highlight
• Race look

• Approvals: HOMNN_EU
• Colour: Orange
• Factory Racing: USED BY FACTORY RACING

• Dead straight and impact-free chain track
• Free from vibration – therefore the highest power transmission efficiency
• Reduces the rotating masses
• Elegant anodised surface
• Extremely light
• Made of high-strength aluminum
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Number Of Teeth: 50 teeth

Color differences between the upper and lower triple clamp cannot be technically ruled out.

• CNC milled aluminum triple clamp
• Elegant anodised surface
• Visual highlight
• Optimally tuned steering stem stiffness
• 100% alignment of the fork tubes
• Ideal flexibility – precisely customised to the WP fork
• Specially optimised geometry of the fork clamping
• No ovalization of the fork outer tube
• Highly precise and smooth fork response
• Maximum handling gain
• Gain in stability at the front wheel
• Overall, more homogeneous force flows in the entire vehicle
• Including steering stem with steering head bearing already pressed on

• Approvals: CCCUO_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Includes drilling for safety wire
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Includes drilling for safety wire

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Protects the radiator from mud, dirt and sand
• Protection against rapid overheating of the engine in muddy conditions
• For extremely muddy conditions

• Approvals: HOMNN_EU

• 105 Factory kit with more displacement (105 instead of 85)
• Significantly more torque
• Significantly more performance

• Approvals: CCCUO_EU

• Extremely robust spark plug
• Center electrode tip made of iridium
• Reinforced ground electrode (against vibration and breakage)
• Special design with improved anti-sooting characteristic
• Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box

• Approvals: CCCUO_EU

• Race look

• Approvals: HOMNN_EU
• Colour: Orange

• Extra strong sheet steel
• Nickel-plated surface
• Wide, even engine speed range
• Higher speed
• More traction
• Better gas control

• Approvals: CCCUO_EU
• Surface (PowerParts): Nickelplated

• Specially developed for use in motocross
• Silencer housing made of high-grade aluminum
• Stainless steel silencer cap
• Rich sound
• Low noise level
• Permanently welded brackets
• Easy to mount
• Perfect fit
• Reduced weight

• Approvals: CCCUO_EU
• Colour: Black
• Material (PowerParts): Aluminium

• Coated neoprene ring
• Simply pulled over the grips

• Approvals: HOMNN_EU
• Colour: Orange

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Approvals: HOMNN_EU
• Colour: Grey
• Note: Closed end

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

• Approvals: HOMNN_EU
• Colour: Grey
• Note: Closed end

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Approvals: HOMNN_EU
• Colour: Grey
• Note: Open end

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Approvals: HOMNN_EU
• Colour: Black
• Note: Closed end

• For a secure grip
• Maximum grip on the hand grip even in extremely muddy conditions

• Approvals: HOMNN_EU
• Colour: Black

• A motorcycle hand grip can be mounted on the handle (not included)

• Approvals: HOMNN_EU

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Mounting not possible with Twinwall handlebars

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Mounting not possible with Twinwall handlebars

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Attached directly at the levers with a special mounting

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Never again cold fingers!
• Mounting over handlebar and switches
• Better control during winter ride-outs

• Approvals: HOMNN_EU

• Approvals: EC-V
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Height (PowerParts): 37

• Approvals: CCCUO_EU
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Height (PowerParts): 20

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Approvals: EC-V
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Tested in complex and specially-developed test cycles
• Made of high-strength aluminum
• Position markings for easy adjustment

Dimensions: A=113mm / B=779mm / C=75mm

• Approvals: CCCUO_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

• Approvals: CCCUO_EU
• Colour: Orange
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

Renthal Twinwall 996

• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• Approvals: CCCUO_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Including plastic insert
• Reduces the risk of a lever being broken

Suitable for all Brembo® and Formula brake and clutch assembles

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Ideal protection for sealing the fork
• For use with an open fork protector

• Approvals: HOMNN_EU

• Prevents abrasion of the frame by dirt, falls or the driver's boots
• Protects trousers and boots from burns on the exhaust side

• Approvals: HOMNN_EU
• Colour: Black

• Protects the frame without changing the slim lines of your motorcycle

• Approvals: HOMNN_EU
• Colour: Electronic orange

• CNC milled from high-strength aluminum
• Best possible effective protection for the clutch slave cylinder
• Prevents damage to the engine housing in the event of chain cracks
• No stones drawn in between chain and engine housing (gentle on the material)
• Protects from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Resistant coating
• Enables shorter drivers to also achieve the optimum seat height
• Lower compared to the standard seat

• Approvals: HOMNN_EU
• Colour: Black
• Height (PowerParts): -15

• Resistant coating
• Grow a bit more with the bike
• For the slightly taller racer of the future
• Higher compared to the standard seat

• Approvals: HOMNN_EU
• Colour: Black
• Height (PowerParts): +20

• Approvals: HOMNN_EU

• Developed according to the requirements of our factory drivers
• Resistant coating
• Special gradation for good grip even when accelerating hard
• Standard seat height
• Same seat height like the standard seat

• Approvals: HOMNN_EU
• Colour: Black

• CNC milled from high-strength aluminum
• Not lockable
• Extremely fast and keyless refueling

• Approvals: CCCUO_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Approvals: HOMNN_EU
• Colour: Orange

• Tool for lifting the motorcycle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel
• Type: Recommended

• Secure stand for your bike

• Made especially for 50 / 65 / 85 models
• Aluminum construction with a non-slip pad.
• The top is wedge shaped and solid so the bike doesn't slide around when washing.

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Aluminium
• Height (PowerParts): 360-380
• Type: Kein Fahrzeug

• Stabilises the motorcycle during transport
• After transport, the tool serves as a perfect plug-in stand!

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Protects the intake system against water and dirt when cleaning the air filter box

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• Approvals: HOMNN_EU
• Not Available In: Vereinigte Arabische Emirate

• The Bead Buddy acts as your third hand when fitting tires
• Holds the tire in the tire bed, thereby making tire fitting much easier
• Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Approvals: HOMNN_EU

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• Approvals: HOMNN_EU
• Colour: Black
• Diameter: 400 mm

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Approvals: HOMNN_EU

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

• Approvals: HOMNN_EU
• Colour: Red

• Adjusting the air pressure
• Convenient and easy to use
• Very easy operation

• Approvals: HOMNN_EU
• Colour: Black
• Type: Mandatory
• Technical Details: Display: Digital pressure gauge

• Convenient and easy to use

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• With scaling for both the fluid level and different mixture ratios.
• Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister.
• Simple handling thanks to the ergonomic design.

• Approvals: HOMNN_EU
• Colour: Transparent
• Volume: 1

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Colour: Transparent
• Volume: 0.25

• Keeps water out of the silencer during cleaning
• For inner-diameter of 15-37 mm

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Convenient and easy to use
• Adjusting the air pressure
• Made of the highest quality materials
• Elegant anodised surface

• Helpful tool for easier adjustment of the fork air pressure on the air fork in combination with the use of the for air pump.
• The quick-lock coupling remains on the air fork.

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Convenient and easy to use
• Made of the highest quality materials

• The quick-lock coupling remains on the air fork.
• Ideal when using the quick lock kit with multiple motorcycles.

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Approvals: HOMNN_EU
• Diameter: 0,61 mm

• Makes setting the sag significantly simpler.
• Folding version for easy stowing in the tool box.

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Comfortable unhooking of springs
• Convenient and easy to use
• Easy handling and operation

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel
• Type: Recommended

• 3 x short version 51012092100
• 3 x long version 51012093100

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel

The optimum solution for always having the most important tools to hand when on the road.

• Approvals: HOMNN_EU

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Approvals: HOMNN_EU
• Colour: Orange

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Approvals: HOMNN_EU

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU

• The ideal tool for checking perfect wheel position when tensioning the chain.

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium
• Weight: 5.5

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Approvals: HOMNN_EU

• Perfect for all on the move
• Exceptionally robust

• Can be used with XACT/ XPLOR forks and shocks
• Dimensions L=44,09 inch / W=16,14 inch / H=6,30 inch

• Approvals: HOMNN_EU

• Prevents dirty grips

• Approvals: HOMNN_EU

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Approvals: HOMNN_EU
• Colour: Black

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Approvals: HOMNN_EU
• Colour: Black

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Approvals: HOMNN_EU
• Colour: Black

• Transparent plastic canister including a flexible hose and screw cap
• For legal reasons, not to be used in some countries for storage and transportation of gasoline

• Approvals: CCCUO_EU
• Colour: Transparent
• Volume: 20

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back
• The special KTM design will cause a sensation in your service zone

• Approvals: HOMNN_EU

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Complies with FIM regulations
• Rubberised back

• Approvals: HOMNN_EU

• Provides optimum protection

• Approvals: HOMNN_EU

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Designed to completely change the original look of your motorcycle
• Glue the graphics kit directly onto the standard fairing parts
• Can be removed without leaving any residue
• Made of the highest quality materials
• Visual highlight
• Perfect fit
• Personalise the look of your motorcycle
• Race look

• Approvals: HOMNN_EU

• Extra strong film

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Approvals: HOMNN_EU
• Start Number: 9

• Approvals: HOMNN_EU
• Start Number: 0

• Made of robust material
• Pre-cut stickers

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic

• Protects the intake system against water and dirt when cleaning the air filter box

• Approvals: HOMNN_EU
• Colour: Electronic orange
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic
• Alignment: Right

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Colour: Electronic orange
• Material (PowerParts): Plastic
• Alignment: Front

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic
• Alignment: Front

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Colour: White
• Material (PowerParts): Plastic

• Elegant look

• Approvals: HOMNN_EU
• Colour: Silver
• Material (PowerParts): Aluminium
• Type: Kein Fahrzeug

• Anodised valve caps

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Anodised valve caps
• With valve opener function

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Type: Recommended

• Type: Recommended

• Type: Recommended

• Type: Recommended

• Type: Recommended

• Type: Recommended

• Type: Recommended

• Type: Mandatory
• Technical Details: Inside diameter: 31.5 mm (1.24 in)

• Type: Recommended

• Type: Recommended
• Technical Details: Diameter: 12 mm (0.47 in)

• Type: Recommended
• Technical Details: Diameter: 12 mm (0.47 in)

• Type: Recommended
• Technical Details: Diameter: 27 mm (1.06 in)

• Type: Kein Fahrzeug
• Technical Details: Diameter: 38 mm (1.5 in)

• Type: Recommended
• Technical Details: Diameter: 8 mm (0.31 in)

• Type: Kein Fahrzeug
• Technical Details: Diameter: 34 mm (1.34 in)

• Type: Recommended
• Technical Details: Diameter: 43 mm (1.69 in)

• Type: Recommended
• Technical Details: Diameter: 12 mm (0.47 in)

• Type: Recommended
• Technical Details: Diameter: 11.5 mm (0.453 in)

• Type: Recommended
• Technical Details: Diameter: 43 mm (1.69 in)

• Type: Kein Fahrzeug
• Technical Details: Hexagonal part: 45 mm (1.77 in)

• Type: Recommended

• Type: Mandatory