• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Aluminium
• Alignment: Front

• Made of high-quality carbon
• Lighter than series components
• Perfect fit
• High stiffness and strength
• Race look

• Approvals: HOMNN_EU
• Material (PowerParts): Carbon

• High stiffness and strength
• Made of high-quality carbon
• Lighter than series components
• Perfect fit
• Race look

• Approvals: HOMNN_EU
• Material (PowerParts): Carbon

• Contains all parts for dismantling the side stand
• Simulates a folded up side stand
• Plug & Play mounting

• Approvals: CCCUO_EU

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Alignment: Rear

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Factory Racing: USED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium
• Weight: 0.031

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Easily accessible
• Mounting material included in scope of supply
• With protective cover
• Output voltage 5 V/1,000 mA

• Approvals: HOMNN_EU

• Developed for use on the race track
• Race look

• To adjust the width of the brake lever with the left hand during riding

• Approvals: HOMNN_EU
• Colour: Black
• Factory Racing: INSPIRED BY FACTORY RACING
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

A must for every rider with sporting ambition!

This PowerPart acts as a sacrificial part and protects the original handlebar stop from bending or snapping. Thanks to the simple assembly, it can be replaced quickly following a fall. Which means your KTM is READY TO RACE at all times!

• Race track tested (RC390 CUP)
• Made from black-dyed and extremely high grade polyamide material

• Approvals: HOMNN_EU

• Resistant waterproof coating
• Waterproof roll closure
• For waterproof storage of documents, maps, cellphones, navigation devices etc.

• Approvals: HOMNN_EU
• Colour: Black
• Volume: 4

Can be mounted on older versions of the smartphone bracket to adapt it to the new "SPC+" mounting system

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Universal and inconspicuous bracket for your smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

Includes also a anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay.
It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.

New "SPC+" mounting system

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone 11 PRO

• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone14

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: HUAWEI Mate 20 Pro

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: IPhone XR

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S10+

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S20

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S20 Ultra

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S20+

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Approvals: HOMNN_EU
• Colour: Black
• Smartphone: Samsung Galaxy S8+/S9+

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Dimensions: 66x55mm (2.6x2.17 inch)

• Approvals: HOMNN_EU

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66x55mm (2.6x2.17 inch).

• Approvals: HOMNN_EU

• Protects your valuable smartphone from rain, dust or mud
• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Touchscreen remains fully functional

• Approvals: HOMNN_EU
• Smartphone: 153 x 70 mm

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Approvals: HOMNN_EU
• Smartphone: 153 x 70 mm

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Approvals: HOMNN_EU
• Smartphone: 165 x 80 mm

• Plug & Play mounting

• Wiring harness ready for fitting
• Fail-safe, dual-circuit immobiliser
• Integrated microchip motion sensor
• Two watertight, anti-scan radio transmitters with rolling code
• An additional mounting kit is required for installation
• Thatcham homologated (strictest European test method)

• Approvals: CE
• Not Available In: Japan

• Easy to mount
• Protects from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black
• Alignment: Rear

• Easy to mount
• Protects from damage in the event of a fall

• Approvals: HOMNN_EU
• Colour: Black
• Alignment: Front

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Screwed directly to the brake caliper
• Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc
• It is not possible to move the vehicle when it is locked
• No disassembly possible in locked state 

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Screwed directly to the brake caliper
• Safety bolt made of high-strength steel engages directly in the drill hole of the brake disc
• It is not possible to move the vehicle when it is locked
• No disassembly possible in locked state 

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

Developed by Akrapovič in collaboration with the KTM Factory Team: the highest quality factory header you can buy for your motorcycle. Top titanium quality and maximum weight reduction are the secrets behind the outstanding successes of the KTM Factory Team.
 The benefits:

• Perceptible increase in performance throughout the rev range
• Made from titanium - that means: ultra-light
• Highest quality workmanship
• Optimum header routing

• Approvals: CCCUO_EU
• Factory Racing: INSPIRED BY FACTORY RACING
• Material (PowerParts): Titanium

• Approvals: CCCUO_EU
• Material (PowerParts): Titanium

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Approvals: HOMNN_EU
• Colour: Orange

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the triple clamp
• Makes removal of the front wheel easier

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the fork legs
• Makes removal of the front wheel easier

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the triple clamp
• Makes removal of the front wheel easier

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel
• Type: Recommended

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Colour: Black
• Surface (PowerParts): Powder-coated
• Material (PowerParts): Steel

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Steel
• Type: Recommended

• These support adapters give your motorcycle an even firmer standing position

• Approvals: HOMNN_EU
• Colour: Black
• Type: Recommended

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• Approvals: HOMNN_EU
• Not Available In: Vereinigte Arabische Emirate

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• Approvals: HOMNN_EU
• Colour: Black
• Diameter: 400 mm

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Chain Pitch: 520

• Patented gage for two important checks:
• Check and adjust chain tension
• Check chain lengthening (wear)

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• 100 mm length
• 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm

• Approvals: HOMNN_EU

• Contents are in accordance with DIN standard 13167-2014 for motorcyclists
• Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).

• Approvals: HOMNN_EU
• Colour: Red

• This clever tool is a must for every motorcycle toolbox
• With it, you can remove dirt from your fork seals effortlessly
• No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
• For all 48 mm forks

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• With scaling for both the fluid level and different mixture ratios.
• Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister.
• Simple handling thanks to the ergonomic design.

• Approvals: HOMNN_EU
• Colour: Transparent
• Volume: 1

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU
• Diameter: 0,61 mm

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU
• Colour: Orange
• Material (PowerParts): Plastic

• Approvals: HOMNN_EU

• 3 x short version 51012092100
• 3 x long version 51012093100

• Approvals: HOMNN_EU
• Colour: Black
• Material (PowerParts): Steel

The optimum solution for always having the most important tools to hand when on the road.

• Approvals: HOMNN_EU

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 6 to 24
• Allen keys from 3 to 10
• Phillips and slotted bits
• Torx bits from 15 to 55

• Approvals: HOMNN_EU
• Colour: Orange

• Ratchet (with locking device), lever, two extensions and socket wrench
• Hexagon sockets from 4 to 14
• Allen keys from 3 to 8
• Phillips, slotted and Torx bits

• Approvals: HOMNN_EU

• Push-on spoke wrenches in sizes 5.65 and 6.95 mm
• Push-on ratchet ¼"
• Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Approvals: HOMNN_EU
• Colour: Black

• Approvals: HOMNN_EU

• Optimum tyre temperature is achieved after only 30 minutes or so and then stabilized by a high-precision thermostat (+/-1°C)
• LED for monitoring the set temperature and the current status (heating up/maintaining temperature level)
• The electronic controller enables selection of three temperature ranges:
• 50° C for rain tyres, 80° C and 100° C subject to tyre manufacturer specifications
• The carbon-fiber heating element is arranged transversely in a double circuit and ensures optimum heating of the tyre flank. The carbon fiber is coated in a heat-conducting silicone layer for maximum strength and protection from damage. A special non-stick material with interwoven copper strands ensures optimized heat conduction from the tyre warmer to the tread.
• Elasticated side covers ensure an excellent fit
• With the cover pulled far over the tyre flank, the rim also heats up very quickly
• Insulating layer to prevent heat loss to the exterior
• Made from water-repellent, oil and fuel-proof, fire and rip-resistant material
• CE-certified
• 230 VAC, 50 - 60 Hz, Euro plug
• Fits tyre sizes from min. 180/55 - 17 up to max. 200/60 - 17

• Approvals: CE
• Colour: Black

• The ideal tool for checking perfect wheel position when tensioning the chain.

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Approvals: HOMNN_EU
• Material (PowerParts): Aluminium
• Weight: 5.5

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Approvals: HOMNN_EU

• Prevents dirty grips

• Approvals: HOMNN_EU

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Approvals: HOMNN_EU
• Colour: Black

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops

• Approvals: HOMNN_EU
• Colour: Black

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Approvals: HOMNN_EU
• Colour: Black

• Transparent plastic canister including a flexible hose and screw cap
• For legal reasons, not to be used in some countries for storage and transportation of gasoline

• Approvals: CCCUO_EU
• Colour: Transparent
• Volume: 20

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Approvals: HOMNN_EU
• Colour: Orange

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back
• The special KTM design will cause a sensation in your service zone

• Approvals: HOMNN_EU

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Complies with FIM regulations
• Rubberised back

• Approvals: HOMNN_EU

• Provides optimum protection

• Approvals: HOMNN_EU

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Made from a high quality, elastic base film
• Structured surface for better grip
• No more unsightly scratches or matt areas on the tank flanks

• Approvals: HOMNN_EU

• Approvals: HOMNN_EU
• Start Number: 9

• Approvals: HOMNN_EU
• Start Number: 0

• Made of robust material
• Pre-cut stickers

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Approvals: HOMNN_EU
• Material (PowerParts): Steel

• Approvals: HOMNN_EU
• Material (PowerParts): Stainless steel

• Elegant look

• Approvals: HOMNN_EU
• Colour: Silver
• Material (PowerParts): Aluminium
• Type: Kein Fahrzeug

• Anodised valve caps

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Anodised valve caps
• With valve opener function

• Approvals: HOMNN_EU
• Colour: Orange
• Surface (PowerParts): Anodized
• Material (PowerParts): Aluminium

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Approvals: HOMNN_EU
• Colour: Orange
• Wheel Size: 17

• Type: Service

• 220 Volt
• For all WP-shocks
• Two 3 litre tanks
• Fill two different shocks at the same time
• Programmable filling cycle time
• Two filling presets
• Intuitive control via a 4.3" LCD screen
• Low oil warning
• Vacuum 42L/min
• Max. vacuum -0,98 bar
• Adjustable pressure 1,5-3 bar
• Incl. 2 WP-adapters

• Approvals: HOMNN_EU
• Type: Kein Fahrzeug

• Type: Service