KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum
Chrome-plated pad guide pins on the brake caliper
The benefits:
Reduced brake pad canting, hence no uneven wear
Constant braking feel, irrespective of brake pad wear or temperature
No vibration from the brake
Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Outer ring made of stainless high-performance brake steel
Minimal wear on brake pads
Significantly longer lasting
With Flame design for added braking performance
Approvals: ABE
Diameter: 220
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Stainless steel
Alignment: Rear
Visa hela beskrivningen
No fading
Outer ring made of stainless high-performance brake steel
Minimal wear on brake pads
Significantly longer lasting
With Flame design for added braking performance
Approvals: ABE
Diameter: 220
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Stainless steel
Alignment: Rear
Användarmanual:
77709160000
Lagerstatus:
Pris: 1695kr
Köp
Wave brake disc
Floating
Outer ring made of stainless high-performance brake steel
Inner ring anodised
Minimal wear on brake pads
Approvals: EC-V
Colour: Black
Diameter: 260 mm
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Visa hela beskrivningen
Floating
Outer ring made of stainless high-performance brake steel
Inner ring anodised
Minimal wear on brake pads
Approvals: EC-V
Colour: Black
Diameter: 260 mm
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Alignment: Front
Användarmanual:
58409060200
Lagerstatus:
Pris: 3270kr
Köp
Wave brake disc
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
Approvals: ABE
Colour: Orange
Diameter: 320 mm
Material (PowerParts): Stainless steel
Visa hela beskrivningen
Floating, stainless steel brake disc. The inner ring is made of aluminum to save weight. The pressure point doesn’t change, even when subjected to extreme temperatures and forces. Please note: Combination with 58413014000 not possible! Not for use with 2-piston Brembo® brake caliper.
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. With additional fork protector reinforcement for more stable attachment to the fork stub.
Approvals: HOMNN_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
This is how the factory riders start! The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically. With additional fork protector reinforcement for more stable attachment to the fork stub.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
54835980000
Lagerstatus:
Pris: 100kr
Köp
Foam rubber
Protects the radiator from mud, dirt and sand
Protection against rapid overheating of the engine in muddy conditions
For extremely muddy conditions
Approvals: HOMNN_EU
Protects the radiator from mud, dirt and sand
Protection against rapid overheating of the engine in muddy conditions
For extremely muddy conditions
Approvals: HOMNN_EU
78135936100
Lagerstatus:
Pris: 1165kr
Köp
Radiator protection
Perfect protection for the radiator; easily fitted.
Approvals: HOMNN_EU
Perfect protection for the radiator; easily fitted.
Practical tool for regulating the mixture on the carburetor - without the need for any other tools.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Practical tool for regulating the mixture on the carburetor - without the need for any other tools.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
77335955044
Lagerstatus:
Pris: 1020kr
Köp
Water pump impeller
Increases the flow rate and consequently reduces the coolant temperature. Can only be mounted in combination with an Akrapovič manifold.
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Increases the flow rate and consequently reduces the coolant temperature. Can only be mounted in combination with an Akrapovič manifold.
Approvals: HOMNN_EU
Material (PowerParts): Aluminium
Användarmanual:
PASSAR TILL
SXS10450500
FACTORY HEADERS TITAN SXS
SXS07450500
SXS07450501
SXS10450512
Lagerstatus:
Pris: 7455kr
Köp
Akrapovič "Slip-on Line"
This slip-on factory silencer has been developed in collaboration with Akrapovič for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics. The benefits:
Improved torque curve combined with very rideable peak performance
More sensitive throttle response and resulting improved traction
Durability suitable for extreme enduro use
Made from titanium - that means: ultra-light
Welded on brackets
Reinforced titanium end cap (factory team standard)
Pleasant deep sound
Tuned for compliance with the latest applicable noise regulations
With removable noise reduction insert. Can only be fitted in combination with original header.
Approvals: CCCUO_EU
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Titanium
Visa hela beskrivningen
This slip-on factory silencer has been developed in collaboration with Akrapovič for the very specific requirements of enduring offroad use (for enduro, motocross and supermoto too) and very carefully tuned to the KTM characteristics. The benefits:
Improved torque curve combined with very rideable peak performance
More sensitive throttle response and resulting improved traction
Durability suitable for extreme enduro use
Made from titanium - that means: ultra-light
Welded on brackets
Reinforced titanium end cap (factory team standard)
Pleasant deep sound
Tuned for compliance with the latest applicable noise regulations
With removable noise reduction insert. Can only be fitted in combination with original header.
Approvals: CCCUO_EU
Factory Racing: USED BY FACTORY RACING
Material (PowerParts): Titanium
Användarmanual:
RESERVDELAR
DUMMY RIVET 4,8X 8,0 NIRO
0011480800
SXS10450517
SXS10450514
SPARKARRESTOR INSERT
SXS07250518
SXS07540509
EXHAUST-SPRING SMALL W. RUBBER
57305016100
ceramic anti-seizing grease
76505099070
COPPER PASTE
76505099060
54803047000
Lagerstatus:
Pris: 295kr
Köp
Footpeg slider kit
Protects the footpegs from damage during a potential fall
For use with stock foot pegs.
Approvals: HOMNN_EU
Colour: Black
Protects the footpegs from damage during a potential fall
For use with stock foot pegs.
Approvals: HOMNN_EU
Colour: Black
78003940244
Lagerstatus:
Pris: 2255kr
Köp
Pivot Pegz
Move along with weight shift
Permanent contact between boot and footpeg
Extends the service life of your boots
Enlarged tread area
More control
More curve pressure
Easier and faster weight shifting
Easier shifting and braking
Spring-mounted, 20-degree rotational movement possible towards front and rear
Approvals: EC-V
Visa hela beskrivningen
Move along with weight shift
Permanent contact between boot and footpeg
Extends the service life of your boots
Enlarged tread area
More control
More curve pressure
Easier and faster weight shifting
Easier shifting and braking
Spring-mounted, 20-degree rotational movement possible towards front and rear
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Adjustable to 3 different heights: 28 mm, 37 mm, 46 mm. Available for handlebar diameters 22 mm and 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
Användarmanual:
59001039144
Lagerstatus:
Pris: 885kr
Köp
Handlebar mount kit
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU
Material (PowerParts): Aluminium
79701939144
Pris: 560kr
Köp
Handlebar mount kit
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Approvals: EC-V
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 37
Visa hela beskrivningen
Available in five different heights. Included in the kit are 2x handlebar support lower parts and 2x fastening bolts. The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
Visa hela beskrivningen
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
RESERVDELAR
HH COLLAR SCREW M 8X30 WS=10
0025080306
54801043020
Lagerstatus:
Pris: 345kr
Köp
Handlebar riser
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Height (PowerParts): 20
Visa hela beskrivningen
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Tested in complex and specially-developed test cycles
Position markings for easy adjustment
Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high-strength aluminum
Tested in complex and specially-developed test cycles
Position markings for easy adjustment
Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
25-9991-04
Lagerstatus:
Pris: 2549kr
Köp
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
7950290100004
Lagerstatus:
Pris: 2265kr
Köp
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Orange
Factory Racing: USED BY FACTORY RACING
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
79502901000C1
Lagerstatus:
Pris: 2265kr
Köp
Renthal Twinwall handlebar
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Two handlebars in one
The exterior ensures maximum resistance to external damage (e.g. fall)
Additionally hard anodised against corrosion
The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
Nylon inserts in the inner tube allow thinner walls
Very good flex properties
Comes with handlebar pad
Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU
Colour: Black
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77711979000
Lagerstatus:
Pris: 175kr
Köp
Auxiliary wiring harness
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
Visa hela beskrivningen
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well
The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979010
Auxiliary wiring harness
77711979044
77711979010
Lagerstatus:
Pris: 100kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979000
77711979044
Lagerstatus:
Pris: 325kr
Köp
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Approvals: HOMNN_EU
Visa hela beskrivningen
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
Auxiliary wiring harness
77711979000
Pull switch bracket
77711969044
78112920044
Lagerstatus:
Pris: 150kr
Köp
Hourmeter bracket
To assemble the hour counter on the triple clamp.
Approvals: HOMNN_EU
To assemble the hour counter on the triple clamp.
Approvals: HOMNN_EU
REKOMMENDERADE PRODUKTER
78112920000
59002025100
Lagerstatus:
Pris: 870kr
Köp
Hot-start control cable
No more fiddling with the carburetor to get the hot engine running again. Can only be fitted if a hot start device is available on the carburetor.
Approvals: HOMNN_EU
No more fiddling with the carburetor to get the hot engine running again. Can only be fitted if a hot start device is available on the carburetor.
Approvals: HOMNN_EU
77702944000
Lagerstatus:
Pris: 220kr
Köp
Clamp
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Including plastic insert
Reduces the risk of a lever being broken
Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
54802005000
Lagerstatus:
Pris: 175kr
Köp
Handlebar ends
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum
Elegant anodised surface
Visual highlight
Prevents the hand grips from chafing in the event of a fall
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
RESERVDELAR
FLAT HEAD SCREW DIN7991-M 6X50
0991060503
hex nut DIN 934 M6
0934060003
79002901050
Lagerstatus:
Pris: 435kr
Köp
Handlebar pad
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
Already mandatory in many competitions
Provides optimum protection
Visual highlight
With the integrated card holder you always have the time in view. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Visa hela beskrivningen
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Approvals: HOMNN_EU
Användarmanual:
7802906500004
Lagerstatus:
Pris: 110kr
Köp
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Approvals: HOMNN_EU
Colour: Transparent
Volume: 0.25
Visa hela beskrivningen
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
Visa hela beskrivningen
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
Approvals: HOMNN_EU
Colour: Black
Material (PowerParts): Steel
58312078000
Lagerstatus:
Pris: 175kr
Köp
Tool bag
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
The optimum solution for always having the most important tools to hand when on the road.
Approvals: HOMNN_EU
00029098400
Lagerstatus:
Pris: 2030kr
Köp
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Colour: Orange
Visa hela beskrivningen
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 6 to 24
Allen keys from 3 to 10
Phillips and slotted bits
Torx bits from 15 to 55
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Colour: Orange
00029098300
Lagerstatus:
Pris: 855kr
Köp
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
Visa hela beskrivningen
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. Content:
Ratchet (with locking device), lever, two extensions and socket wrench
Hexagon sockets from 4 to 14
Allen keys from 3 to 8
Phillips, slotted and Torx bits
With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU
00029996000
Lagerstatus:
Pris: 3040kr
Köp
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
Visa hela beskrivningen
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm
Push-on ratchet ¼"
Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Approvals: HOMNN_EU
78129984000
Lagerstatus:
Pris: 1125kr
Köp
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU
Colour: Orange
Surface (PowerParts): Anodized
Material (PowerParts): Aluminium
77329068000
Lagerstatus:
Pris: 455kr
Köp
Tyre pressure gauge
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Visa hela beskrivningen
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Disengageable display and work area lighting
Energy-saving function with automatic cut-off
Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU
Colour: Black
Användarmanual:
54829068000
Lagerstatus:
Pris: 345kr
Köp
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Approvals: HOMNN_EU
Visa hela beskrivningen
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).