77206920100
Pris: 110kr
Air filter dust protection
This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
This large-pore air filter cover acts as an additional protective layer, hence extending the filter service interval. Recommended in extremely dusty conditions.
Air filter sand protection
59006922000
59006922000
Pris: 220kr
Air filter sand protection
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Recommended for use on sandy tracks. Installation together with oiled air filter and dry dust guard 77206920100.
Air filter dust protection
77206920100
77206921100
Pris: 110kr
Air filter water protection
Recommended in extremely wet conditions.
Recommended in extremely wet conditions.
5841301564404
Pris: 6210kr
4 piston brake caliper
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum Chrome-plated pad guide pins on the brake caliper The benefits:Reduced brake pad canting, hence no uneven wear Constant braking feel, irrespective of brake pad wear or temperature No vibration from the brake Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
KTM brake calipers are distinguished by the following features:
CNC milled from high-strength solid aluminum Chrome-plated pad guide pins on the brake caliper The benefits:Reduced brake pad canting, hence no uneven wear Constant braking feel, irrespective of brake pad wear or temperature No vibration from the brake Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose. Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required. In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Wave brake disc
25009260000
SXS09125512
Pris: 11290kr
Factory Racing brake caliper
Clear pressure point across the entire temperature range More brake power Higher stiffness with the same weight Made of high-strength aluminum Approvals: CCCUO_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Aluminium Alignment: Front
Visa hela beskrivningen
Clear pressure point across the entire temperature range More brake power Higher stiffness with the same weight Made of high-strength aluminum Approvals: CCCUO_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Aluminium Alignment: Front
REP. KIT SEALS 24MM
77013021000
REP. KIT PISTON 24MM
77013019000
RETAINING PLATE SET BREMBO
77013018000
BLEEDER SCREW WITH CAP
61013020100
58309060000
Pris: 2395kr
Brake disc
Outer ring made of stainless high-performance brake steel Larger diameter for added braking performance Approvals: CCCUO_EU Diameter: 320 mm Material (PowerParts): Stainless steel
Outer ring made of stainless high-performance brake steel Larger diameter for added braking performance Approvals: CCCUO_EU Diameter: 320 mm Material (PowerParts): Stainless steel
Sensor magnet retaining bracket
79014950044
Brake caliper support
77013914000
78910960100
Pris: 1125kr
Flame brake disc
No fading Outer ring made of stainless high-performance brake steel Minimal wear on brake pads Significantly longer lasting With Flame design for added braking performance Approvals: ABE Diameter: 220 Factory Racing: USED BY FACTORY RACING Material (PowerParts): Stainless steel Alignment: Rear
Visa hela beskrivningen
No fading Outer ring made of stainless high-performance brake steel Minimal wear on brake pads Significantly longer lasting With Flame design for added braking performance Approvals: ABE Diameter: 220 Factory Racing: USED BY FACTORY RACING Material (PowerParts): Stainless steel Alignment: Rear
A46009960000
Pris: 1705kr
Flame brake disc
Floating Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added braking performance Approvals: ABE Colour: Black Diameter: 260 Factory Racing: USED BY FACTORY RACING Material (PowerParts): Aluminium
Visa hela beskrivningen
Floating Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added braking performance Approvals: ABE Colour: Black Diameter: 260 Factory Racing: USED BY FACTORY RACING Material (PowerParts): Aluminium
00010000345
Pris: 2705kr
Flame brake disc kit
Floating Outer ring made of stainless high-performance brake steel Inner ring anodised Minimal wear on brake pads With Flame design for added braking performance Up to 20% weight saving compared to stock components; Incl. the required CNC machined, black anodized brake caliper support for Brembo brake systems
Approvals: ABE Colour: Black Diameter: 270 mm Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
Visa hela beskrivningen
Floating Outer ring made of stainless high-performance brake steel Inner ring anodised Minimal wear on brake pads With Flame design for added braking performance Up to 20% weight saving compared to stock components; Incl. the required CNC machined, black anodized brake caliper support for Brembo brake systems
Approvals: ABE Colour: Black Diameter: 270 mm Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
77709160000
Pris: 1695kr
Wave brake disc
Floating Outer ring made of stainless high-performance brake steel Inner ring anodised Minimal wear on brake pads Approvals: EC-V Colour: Black Diameter: 260 mm Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
Visa hela beskrivningen
Floating Outer ring made of stainless high-performance brake steel Inner ring anodised Minimal wear on brake pads Approvals: EC-V Colour: Black Diameter: 260 mm Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
59013930100
Pris: 345kr
Brake pad
Softer due to high content of organic substances Thermal insulation by means of ceramic underlayer Less aggressive brake feel Lower friction coefficient than sintered brake pads Special material mixture Approvals: CCCUO_EU Material (PowerParts): Organic Alignment: Front
Visa hela beskrivningen
Softer due to high content of organic substances Thermal insulation by means of ceramic underlayer Less aggressive brake feel Lower friction coefficient than sintered brake pads Special material mixture Approvals: CCCUO_EU Material (PowerParts): Organic Alignment: Front
77013920100
Pris: 560kr
Banjo bolt with bleeder function
With return valve Anodised dust protection cap Quick and easy bleeding of the brake Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Alignment: Front
With return valve Anodised dust protection cap Quick and easy bleeding of the brake Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Alignment: Front
78013920000
Pris: 455kr
Brake bleeder screw
With return valve Anodised dust protection cap Quick and easy bleeding of the brake Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Alignment: Front
With return valve Anodised dust protection cap Quick and easy bleeding of the brake Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Alignment: Front
77013914000
Pris: 1125kr
Brake caliper support
Made of high-strength aluminum Improved braking performance Only for Brembo brake systems. Required for using the 320 mm brake disc 58309060000 with Brembo brake caliper
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high-strength aluminum Improved braking performance Only for Brembo brake systems. Required for using the 320 mm brake disc 58309060000 with Brembo brake caliper
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Sensor magnet retaining bracket
79014950044
77713975030
Pris: 1125kr
Brake disc guard
Made of high-quality carbon Protects the rear brake disc from stones and other solid obstacles Can be fitted on the CNC brake calliper support 77713975044 or 7771397511030 or 7251397500030
Approvals: HOMNN_EU Surface (PowerParts): Glossy finish Material (PowerParts): Carbon Alignment: Rear
Visa hela beskrivningen
Made of high-quality carbon Protects the rear brake disc from stones and other solid obstacles Can be fitted on the CNC brake calliper support 77713975044 or 7771397511030 or 7251397500030
Approvals: HOMNN_EU Surface (PowerParts): Glossy finish Material (PowerParts): Carbon Alignment: Rear
Brake caliper support
A46013975044
HH collar screw M5x10 TX30
0025050106
Brake caliper support
7251397500030
Brake caliper support
77713975044
79109961000
Pris: 855kr
Brake disc guard
Manufactured using state-of-the-art 2-component injection molding technology Extremely light Protects the brake disc from stones and other solid obstacles Central adapter replaces the spacer sleeve on the wheel axle Allows tyre changes, brake service etc. without removing the brake cover Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic Alignment: Front
Visa hela beskrivningen
Manufactured using state-of-the-art 2-component injection molding technology Extremely light Protects the brake disc from stones and other solid obstacles Central adapter replaces the spacer sleeve on the wheel axle Allows tyre changes, brake service etc. without removing the brake cover Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic Alignment: Front
79109961100
Pris: 2255kr
Factory Racing brake disc guard
Manufactured using state-of-the-art 2-component injection molding technology Extremely light Protects the brake disc from stones and other solid obstacles Central adapter replaces the spacer sleeve on the wheel axle Allows tyre changes, brake service etc. without removing the brake cover Noble material mix of carbon fiber and plastic Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Visa hela beskrivningen
Manufactured using state-of-the-art 2-component injection molding technology Extremely light Protects the brake disc from stones and other solid obstacles Central adapter replaces the spacer sleeve on the wheel axle Allows tyre changes, brake service etc. without removing the brake cover Noble material mix of carbon fiber and plastic Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
54813951100
Pris: 560kr
Footbrake lever step plate
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
54812063044
Pris: 110kr
Rear brake safety wire
Protects the brake pedal from bending by branches
Protects the brake pedal from bending by branches
SXS11350030
Pris: 1165kr
Clutch cover protection
DO YOU KNOW about the special properties of carbon?
Extremely light: about 80% lighter than steel with the same load-bearing capacity Very stable: 4 times more resilient than aluminum Ultimate stiffness and strength Free from corrosion High continuous temperature resistance Low thermal expansion And, last but not least, a cool look Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great. Optimum protection against stone impact.
Approvals: HOMNN_EU Material (PowerParts): Carbon
Visa hela beskrivningen
DO YOU KNOW about the special properties of carbon?
Extremely light: about 80% lighter than steel with the same load-bearing capacity Very stable: 4 times more resilient than aluminum Ultimate stiffness and strength Free from corrosion High continuous temperature resistance Low thermal expansion And, last but not least, a cool look Pimp your KTM with carbon components from KTM PowerParts - they save weight and look great. Optimum protection against stone impact.
Approvals: HOMNN_EU Material (PowerParts): Carbon
00010000381
Pris: 1690kr
Factory Racing brake and clutch master cylinder guard
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Visa hela beskrivningen
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
A46010965118EB
Pris: 1120kr
Chain
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Visual highlight Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Electronic orange
Visa hela beskrivningen
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Visual highlight Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Electronic orange
78910065118
Pris: 1245kr
Chain
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Visual highlight Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Gold
Visa hela beskrivningen
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Visual highlight Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Gold
50310165118
Pris: 965kr
Chain
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Black
Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Black
CONNECTING LINK F. 50310165118
50310166000
78010267118
Pris: 1245kr
X-ring chain
Greater flexibility and better running characteristics Constant and permanent lubrication Better sealing against water and dirt Significantly longer durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Black
Visa hela beskrivningen
Greater flexibility and better running characteristics Constant and permanent lubrication Better sealing against water and dirt Significantly longer durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Black
MASTER LINK 5/8X1/4 X-RING
78010266100
79610965118EB
Pris: 1575kr
XW-ring chain
Greater flexibility and better running characteristics Constant and permanent lubrication Better sealing against water and dirt Significantly longer durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Electronic orange
Visa hela beskrivningen
Greater flexibility and better running characteristics Constant and permanent lubrication Better sealing against water and dirt Significantly longer durability Approvals: HOMNN_EU Number Of Chain Links: 118 Chain Pitch: 520 Colour: Electronic orange
7900305300004
Pris: 130kr
Chain slider
In orange Factory look.
Approvals: HOMNN_EU Colour: Orange Alignment: Bottom
In orange Factory look.
Approvals: HOMNN_EU Colour: Orange Alignment: Bottom
7720305300004
Pris: 130kr
Chain slider
In orange factory look.
Approvals: HOMNN_EU Colour: Orange Alignment: Bottom
In orange factory look.
Approvals: HOMNN_EU Colour: Orange Alignment: Bottom
7720406610004
Pris: 295kr
Chain sliding protection
In orange factory look.
Approvals: HOMNN_EU Colour: Orange
In orange factory look.
Approvals: HOMNN_EU Colour: Orange
7810407010004
Pris: 435kr
Chainguide
Visual highlight Race look Approvals: HOMNN_EU Colour: Black
Visual highlight Race look Approvals: HOMNN_EU Colour: Black
A48004970044
Pris: 560kr
Factory chain guide
Highest quality workmanship The right combination of look, style, and performance Specially designed for the challenges of off-road use Made from special, high-strength plastic for maximum stability With exchangeable chain track surface, therefore extremely durable
Visa hela beskrivningen
Highest quality workmanship The right combination of look, style, and performance Specially designed for the challenges of off-road use Made from special, high-strength plastic for maximum stability With exchangeable chain track surface, therefore extremely durable
77304260144
Pris: 150kr
Factory Racing chain guide
Prevents the chain from hitting the rear tyre Perfect chain guide, no branches drawn in between chain and engine housing
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Prevents the chain from hitting the rear tyre Perfect chain guide, no branches drawn in between chain and engine housing
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
78104970000C1
Pris: 1460kr
Factory racing chain guide
Race look Visual highlight With exchangeable chain track surface, therefore extremely durable Specially designed for the challenges of off-road use CNC machined out of teflon
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
Race look Visual highlight With exchangeable chain track surface, therefore extremely durable Specially designed for the challenges of off-road use CNC machined out of teflon
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING
7810497000004
Pris: 1460kr
Factory Racing chainguide
With exchangeable chain track surface, therefore extremely durable Specially designed for the challenges of off-road use Visual highlight Race look CNC machined out of teflon
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
With exchangeable chain track surface, therefore extremely durable Specially designed for the challenges of off-road use Visual highlight Race look CNC machined out of teflon
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING
7973392901304
Välj
13 teeth (Lagerstatus: 2024-11-06) 14 teeth (Lagerstatus: 2024-11-07)
Pris: 230kr
Front sprocket
Resistant to the toughest stresses and strains Forged lightening indents reduce rotational mass Grooves between the teeth clear dirt under the chain Extends chain life Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Number Of Teeth: 13 teeth
Visa hela beskrivningen
Resistant to the toughest stresses and strains Forged lightening indents reduce rotational mass Grooves between the teeth clear dirt under the chain Extends chain life Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Number Of Teeth: 13 teeth
58210951049
Välj
49 teeth (340kr) (Lagerstatus: 2024-11-04) 51 teeth (340kr) (Lagerstatus: 2024-12-05) 52 teeth (345kr) (Lagerstatus: 1)
Pris från: 340kr
Rear sprocket
Significantly longer durability Teeth made of high-strength steel, for an extra long service life Extremely low-wear Recommended for long journeys Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Number Of Teeth: 49 teeth
Visa hela beskrivningen
Significantly longer durability Teeth made of high-strength steel, for an extra long service life Extremely low-wear Recommended for long journeys Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Number Of Teeth: 49 teeth
A4601095104504
Välj
44 teeth (Lagerstatus: 2024-11-04) 45 teeth (Lagerstatus: 2024-11-04) 46 teeth (Lagerstatus: 2024-11-04) 47 teeth (Lagerstatus: 2024-11-04) 48 teeth (Lagerstatus: 1) 49 teeth (Lagerstatus: 1) 50 teeth (Lagerstatus: 2) 51 teeth (Lagerstatus: 1) 52 teeth (Lagerstatus: 2024-12-04) 53 teeth (Lagerstatus: 2024-11-04)
Pris: 795kr
Renthal GP sprocket
Specially designed for the challenges of off-road use Significantly longer durability Made of high-strength aluminum The right combination of look, style, and performance The lightest Renthal Sprocket on the market Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity Combination of a high strength base material and exceptionally hardwearing surface
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 45 teeth
Visa hela beskrivningen
Specially designed for the challenges of off-road use Significantly longer durability Made of high-strength aluminum The right combination of look, style, and performance The lightest Renthal Sprocket on the market Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity Combination of a high strength base material and exceptionally hardwearing surface
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 45 teeth
A46010951044C1
Välj
44 teeth (Lagerstatus: 2024-11-04) 47 teeth (Lagerstatus: 2024-11-04) 48 teeth (Lagerstatus: 1) 49 teeth (Lagerstatus: 1) 50 teeth (Lagerstatus: 1) 51 teeth (Lagerstatus: 1) 52 teeth (Lagerstatus: 2024-11-04) 53 teeth (Lagerstatus: 3)
Pris: 795kr
Renthal GP sprocket
Specially designed for the challenges of off-road use Significantly longer durability Made of high-strength aluminum The right combination of look, style, and performance The lightest Renthal Sprocket on the market Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity Combination of a high strength base material and exceptionally hardwearing surface
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 44 teeth
Visa hela beskrivningen
Specially designed for the challenges of off-road use Significantly longer durability Made of high-strength aluminum The right combination of look, style, and performance The lightest Renthal Sprocket on the market Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity Combination of a high strength base material and exceptionally hardwearing surface
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 44 teeth
8131095104601
Välj
(790kr) (Lagerstatus: 2024-11-04) (785kr) (Lagerstatus: 2024-11-04)
Pris från: 785kr
Supersprox stealth rear sprocket
Teeth made of high-strength steel, for an extra long service life Aluminum center section, reduces unsprung masses Permanently joined together with high-strength rivets At least three times longer service life than other aluminum rear sprockets 50 % lighter than steel rear sprockets Longer service life of the entire drivetrain kit Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 46 teeth
Visa hela beskrivningen
Teeth made of high-strength steel, for an extra long service life Aluminum center section, reduces unsprung masses Permanently joined together with high-strength rivets At least three times longer service life than other aluminum rear sprockets 50 % lighter than steel rear sprockets Longer service life of the entire drivetrain kit Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 46 teeth
5841005105004
Välj
48 teeth (Lagerstatus: 2) 49 teeth (Lagerstatus: 2) 50 teeth (Lagerstatus: 10) 51 teeth (Lagerstatus: 2024-11-04) 52 teeth (Lagerstatus: 4)
Pris: 785kr
Supersprox stealth rear sprocket
Teeth made of high-strength steel, for an extra long service life Aluminum center section, reduces unsprung masses Permanently joined together with high-strength rivets At least three times longer service life than other aluminum rear sprockets 50 % lighter than steel rear sprockets Longer service life of the entire drivetrain kit Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 50 teeth
Visa hela beskrivningen
Teeth made of high-strength steel, for an extra long service life Aluminum center section, reduces unsprung masses Permanently joined together with high-strength rivets At least three times longer service life than other aluminum rear sprockets 50 % lighter than steel rear sprockets Longer service life of the entire drivetrain kit Sprockets with different teeth number as stock are CCCUO_EU!
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number Of Teeth: 50 teeth
A54001996500FAA
Pris: 1125kr
Factory start device
Provides more traction when starting Made of high-strength aluminum Elegant anodised surface Pure race feeling Mounted directly on the OEM-fork Two different selectable preloads, without additional effort in mounting Simple mounting of the fork ring due to two part design No longer necessary to remove the fork
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
Provides more traction when starting Made of high-strength aluminum Elegant anodised surface Pure race feeling Mounted directly on the OEM-fork Two different selectable preloads, without additional effort in mounting Simple mounting of the fork ring due to two part design No longer necessary to remove the fork
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77204905000
Pris: 1690kr
Preload adjuster
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.
The main benefits:
Quick preload adjustment Use of the entire thread length on the shock absorber Very simple to use Low weight dust-resistant Mechanical drive mechanism The shock absorber must be dismantled in order to fit the pre-load adjuster.
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Visa hela beskrivningen
Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber.
The main benefits:
Quick preload adjustment Use of the entire thread length on the shock absorber Very simple to use Low weight dust-resistant Mechanical drive mechanism The shock absorber must be dismantled in order to fit the pre-load adjuster.
Approvals: HOMNN_EU Material (PowerParts): Aluminium
79101999021C1A
Pris: 6305kr
Factory Racing triple clamp
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Specially optimised geometry of the fork clamping No ovalization of the fork outer tube Highly precise and smooth fork response Maximum handling gain Gain in stability at the front wheel Overall, more homogeneous force flows in the entire vehicle Simple offset adjustment Including steering stem with steering head bearing already pressed on Very simple offset adjustment of 20 or 22 mm Shorter offset: Stability on fast straights Longer offset: easier and quicker cornering in curves Color differences between the upper and lower triple clamp cannot be technically ruled out.
Approvals: CCCUO_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Specially optimised geometry of the fork clamping No ovalization of the fork outer tube Highly precise and smooth fork response Maximum handling gain Gain in stability at the front wheel Overall, more homogeneous force flows in the entire vehicle Simple offset adjustment Including steering stem with steering head bearing already pressed on Very simple offset adjustment of 20 or 22 mm Shorter offset: Stability on fast straights Longer offset: easier and quicker cornering in curves Color differences between the upper and lower triple clamp cannot be technically ruled out.
Approvals: CCCUO_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Progressive handlebar damping system (PHDS)
79001939500
Steering stem
79101933000
STE.HEAD SCR. M20X1,5 WS=27 SL
54801036100
AXLESCREW M20X1.5 SW17
70009082000
HH COLLAR SCREW M 8X40 WS=10
0025080406
O-RING SUPPORT W. SEALING LIP
77701084000
TAPERED ROLLER BEARING CPL. 06
54201081100
7810199902204
Pris: 4510kr
Triple clamp
Color differences between the upper and lower triple clamp cannot be technically ruled out.
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Including steering stem with steering head bearing already pressed on Required items for installation on SX models from model year 2016:
Handlebar mount kit 78901939044/144/244/344/444 or PHDS SXS07125200 For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Offset: 22
Visa hela beskrivningen
Color differences between the upper and lower triple clamp cannot be technically ruled out.
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Including steering stem with steering head bearing already pressed on Required items for installation on SX models from model year 2016:
Handlebar mount kit 78901939044/144/244/344/444 or PHDS SXS07125200 For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Offset: 22
Triple clamp protective film kit
78108999020
BOTTOM TRIPLE CLAMP CPL ORANGE
7770113202204
TAPERED ROLLER BEARING CPL. 06
54201081100
O-RING SUPPORT W. SEALING LIP
77701084000
O-RING 25X3,55 NBR70 05
0770025035
HH collar screw M8x50 TX40
0025080506
HH COLLAR SCREW M 8X40 WS=10
0025080406
HH COLLAR SCREW M8X25 WS=10
0025080256S
7810199902004
Pris: 4510kr
Triple clamp
Color differences between the upper and lower triple clamp cannot be technically ruled out.
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Including steering stem with steering head bearing already pressed on Required items for installation on SX models from model year 2016:
Handlebar mount kit 78901939044/144/244/344/444 or PHDS SXS07125200 For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Offset: 20
Visa hela beskrivningen
Color differences between the upper and lower triple clamp cannot be technically ruled out.
Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Including steering stem with steering head bearing already pressed on Required items for installation on SX models from model year 2016:
Handlebar mount kit 78901939044/144/244/344/444 or PHDS SXS07125200 For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Offset: 20
Triple clamp protective film kit
78108999020
TAPERED ROLLER BEARING CPL. 06
54201081100
O-RING 25X3,55 NBR70 05
0770025035
HH collar screw M8x50 TX40
0025080506
HH COLLAR SCREW M 8X40 WS=10
0025080406
HH COLLAR SCREW M 8X25 WS=10
0025080256
O-RING SUPPORT W. SEALING LIP
77701084000
SXS05450210
Pris: 325kr
Brake fluid reservoir and clutch reservoir cover
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
U6951981
Pris: 295kr
Brake fluid reservoir cover
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear
SXS08300040
Pris: 455kr
Factory adjuster wheel set
CNC milled from high-strength aluminum Elegant anodised surface Easy to mount Visual highlight Suitable for the left and right side Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Easy to mount Visual highlight Suitable for the left and right side Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
U6951010
Pris: 110kr
Factory fuel cap vent
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
A54007930000C1
Pris: 110kr
Factory fuel cap vent
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
7723090214430
Pris: 345kr
Factory ignition cover plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77230902144
Pris: 345kr
Factory Racing ignition cover plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
SXS07450265
Pris: 345kr
Factory Racing oil pump cover
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77338941044
Pris: 455kr
Factory Racing-oil filter cover
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
2213099404404
Pris: 345kr
Ignition cover plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
22130994044C1
Pris: 345kr
Ignition cover plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
5903891710004
Pris: 230kr
Oil drain plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Includes drilling for safety wire Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Includes drilling for safety wire Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
22130920044C1
Pris: 435kr
Oil plug
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Includes drilling for safety wire Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Includes drilling for safety wire Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
54835980000
Pris: 100kr
Foam rubber
Protects the radiator from mud, dirt and sand Protection against rapid overheating of the engine in muddy conditions For extremely muddy conditions
Protects the radiator from mud, dirt and sand Protection against rapid overheating of the engine in muddy conditions For extremely muddy conditions
78135936100
Pris: 1165kr
Radiator protection
Perfect protection for the radiator; easily fitted.
Perfect protection for the radiator; easily fitted.
7733503400030
Pris: 175kr
Radiator protection grille
Suitable for the left and right side.
Approvals: HOMNN_EU Colour: Black
Suitable for the left and right side.
Approvals: HOMNN_EU Colour: Black
7203599400004
Pris: 455kr
Water pump cover protection
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area.
Approvals: HOMNN_EU Colour: Orange
This plastic protector prevents damage to the water-pump cover and radiator hose in the hose connection area.
Approvals: HOMNN_EU Colour: Orange
54803047000
Pris: 295kr
Footpeg slider kit
Protects the footpegs from damage during a potential fall For use with stock foot pegs.
Approvals: HOMNN_EU Colour: Black
Protects the footpegs from damage during a potential fall For use with stock foot pegs.
Approvals: HOMNN_EU Colour: Black
78003940244
Pris: 2255kr
Pivot Pegz
Move along with weight shift Permanent contact between boot and footpeg Extends the service life of your boots Enlarged tread area More control More curve pressure Easier and faster weight shifting Easier shifting and braking Spring-mounted, 20-degree rotational movement possible towards front and rear
Visa hela beskrivningen
Move along with weight shift Permanent contact between boot and footpeg Extends the service life of your boots Enlarged tread area More control More curve pressure Easier and faster weight shifting Easier shifting and braking Spring-mounted, 20-degree rotational movement possible towards front and rear
U6951716
Pris: 110kr
Grip donut set
Coated neoprene ring Simply pulled over the grips Optimum protection against blisters on the thumbs with these coated neoprene rings.
Approvals: HOMNN_EU Colour: Orange
Coated neoprene ring Simply pulled over the grips Optimum protection against blisters on the thumbs with these coated neoprene rings.
Approvals: HOMNN_EU Colour: Orange
54802021100
Pris: 165kr
Grip set
Developed according to the requirements of our factory drivers Less stress when riding Objective: comfort AND safety Ergonomic contour adapted to the shape of the hand for maximum comfort Half waffle grip For a secure grip Three areas for the metal wire locking Version: medium Approvals: HOMNN_EU Colour: Grey Note: Closed end
Visa hela beskrivningen
Developed according to the requirements of our factory drivers Less stress when riding Objective: comfort AND safety Ergonomic contour adapted to the shape of the hand for maximum comfort Half waffle grip For a secure grip Three areas for the metal wire locking Version: medium Approvals: HOMNN_EU Colour: Grey Note: Closed end
Throttle twist grip tube
79002013100
54802021000
Pris: 165kr
Grip set
Developed according to the requirements of our factory drivers Less stress when riding Objective: comfort AND safety Ergonomic contour adapted to the shape of the hand for maximum comfort Half waffle grip For a secure grip Three areas for the metal wire locking Version: soft Approvals: HOMNN_EU Colour: Grey Note: Closed end
Visa hela beskrivningen
Developed according to the requirements of our factory drivers Less stress when riding Objective: comfort AND safety Ergonomic contour adapted to the shape of the hand for maximum comfort Half waffle grip For a secure grip Three areas for the metal wire locking Version: soft Approvals: HOMNN_EU Colour: Grey Note: Closed end
Throttle twist grip tube
79002013100
78102924000
Pris: 345kr
Lock-on grip set
Right grip permanently glued to the throttle grip Left grip with aluminum clamping ring for fixing on the handlebar Inconvenient gluing and securing with wire no longer necessary The different guide plates allow a variation of the throttle valve opening.
Approvals: HOMNN_EU Colour: Black Note: Closed end
Visa hela beskrivningen
Right grip permanently glued to the throttle grip Left grip with aluminum clamping ring for fixing on the handlebar Inconvenient gluing and securing with wire no longer necessary The different guide plates allow a variation of the throttle valve opening.
Approvals: HOMNN_EU Colour: Black Note: Closed end
78102922000
Pris: 180kr
Mud grips
For a secure grip Maximum grip on the hand grip even in extremely muddy conditions Approvals: HOMNN_EU Colour: Black
For a secure grip Maximum grip on the hand grip even in extremely muddy conditions Approvals: HOMNN_EU Colour: Black
78712916000
Pris: 175kr
Supporting strap
Makes it easier to stand your motorcycle up Specially developed for extreme conditions Strap made from high-strength nylon Approvals: HOMNN_EU Colour: Black Alignment: Front
Makes it easier to stand your motorcycle up Specially developed for extreme conditions Strap made from high-strength nylon Approvals: HOMNN_EU Colour: Black Alignment: Front
78712917000
Pris: 295kr
Supporting strap
High-strength nylon strap Indispensable for use on extreme terrain Makes it easy to get your bike upright Attaches to rear frame
Approvals: HOMNN_EU Alignment: Rear
Visa hela beskrivningen
High-strength nylon strap Indispensable for use on extreme terrain Makes it easy to get your bike upright Attaches to rear frame
Approvals: HOMNN_EU Alignment: Rear
55102925000
Pris: 1805kr
Throttle twist grip
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
The throttle twist grip has three differently profiled cams, each with a different gear ratio. This allows the throttle response characteristics to be varied in accordance with personal requirements.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Lock-on grip set
79002924100
79602979000AB
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Wrap-around handguard kit
79602979044
Handguard sticker set
77702984000
A42002979000C1
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Handguard sticker set
77702984000
A42002979000AB
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Handguard sticker set
77702984000
A42002979000EB
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached with a special bracket on the handlebar.
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Handguard sticker set
77702984000
79602979000EB
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Wrap-around handguard kit
79602979044
Handguard sticker set
77702984000
79602979000EB
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Wrap-around handguard kit
79602979044
Wrap-around handguard kit
79702984044
Handguard sticker set
77702984000
7960297900030
Pris: 560kr
Factory Racing handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Mounting not possible with Twinwall handlebars Attached directly at the levers with a special mounting Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Factory Racing: USED BY FACTORY RACING Material (PowerParts): Plastic
Wrap-around handguard kit
79602979044
Handguard sticker set
77702984000
79702988044
Pris: 230kr
Handguard bushing kit
Recommended for use in conjunction with radial hand brake cylinders More distance between brake/clutch lever and handguard
Recommended for use in conjunction with radial hand brake cylinders More distance between brake/clutch lever and handguard
Wrap-around handguard kit
79702984044
Handguard kit
79702979000EB
Handguard kit
79702979000AB
Handguard kit
7970297900030
7970297900028
Pris: 1575kr
Handguard kit
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Visa hela beskrivningen
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard bushing kit
79702988044
7970297900030
Pris: 1575kr
Handguard kit
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Visa hela beskrivningen
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Handguard bushing kit
79702988044
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
79702979000AB
Pris: 1575kr
Handguard kit
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Ceramic white Material (PowerParts): Plastic
Visa hela beskrivningen
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Ceramic white Material (PowerParts): Plastic
Handguard bushing kit
79702988044
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
7800207910004
Pris: 675kr
Handguard kit
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
76502979000AB
Pris: 1125kr
Handguard kit
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Ceramic white Material (PowerParts): Aluminium
Visa hela beskrivningen
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Ceramic white Material (PowerParts): Aluminium
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
7770297900004
Pris: 560kr
Handguard kit
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
A49002979000EB
Pris: 560kr
Handguard kit
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting. Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting. Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
A49002979000C1
Pris: 560kr
Handguard kit
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting. Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting. Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
A49002979000AB
Pris: 560kr
Handguard kit
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting.
Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: White Material (PowerParts): Plastic
Visa hela beskrivningen
Uncompromising race look Extremely light Open design Attached directly at the levers with a special mounting.
Only mountable with Brembo brake system
Approvals: HOMNN_EU Colour: White Material (PowerParts): Plastic
60302179100AB
Pris: 735kr
Handguard kit
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
STOP NUT M6 DIN6926 A2-70
0926060000
SHCS DIN 912 M8x40
0912080403
HH COLLAR SCREW M 6X30 SW=8
0025060306
60302179000EB
Pris: 735kr
Handguard kit
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
STOP NUT M6 DIN6926 A2-70
0926060000
SHCS DIN 912 M8x40
0912080403
HH COLLAR SCREW M 6X30 SW=8
0025060306
CLAMP INTERNAL
62002080053
6030217910030
Pris: 735kr
Handguard kit
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
STOP NUT M6 DIN6926 A2-70
0926060000
SHCS DIN 912 M8x40
0912080403
HH COLLAR SCREW M 6X30 SW=8
0025060306
7800207920030
Pris: 675kr
Handguard kit
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
6030217910028
Pris: 735kr
Handguard kit
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Excellent weather protection Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics High version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
STOP NUT M6 DIN6926 A2-70
0926060000
SHCS DIN 912 M8x40
0912080403
HH COLLAR SCREW M 6X30 SW=8
0025060306
7800207920028
Pris: 675kr
Handguard kit
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
7650297900028
Pris: 1125kr
Handguard kit
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Approvals: HOMNN_EU Colour: White Material (PowerParts): Aluminium
Visa hela beskrivningen
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Approvals: HOMNN_EU Colour: White Material (PowerParts): Aluminium
Handguard sticker set
77702984000
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
78002079100EB
Pris: 675kr
Handguard kit
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Closed design 2-component plastic handguard Black middle section = maximum strength for optimum protection Colored top and bottom parts = highly flexible under the roughest conditions Available in two different heights Improved optics Low version
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
STOP NUT M6 DIN6926 A2-70
0926060000
SHCS DIN 912 M8x40
0912080403
HH COLLAR SCREW M 6X30 SW=8
0025060306
CLAMP INTERNAL
62002080053
7650297910030
Pris: 1125kr
Handguard kit
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Visa hela beskrivningen
Excellent weather protection Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
79702979000EB
Pris: 1575kr
Handguard kit
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Excellent weather protection Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Visa hela beskrivningen
Maximum protection against falls, flying stones, branches, etc. Indispensable companion for heavy off-road and Supermoto use Wide, generous design in combination with sturdy aluminum bracket Prevents broken levers Made of robust plastic Excellent weather protection Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium
Handguard bushing kit
79702988044
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
79702908000
Pris: 285kr
Handlebar muffs
Never again cold fingers! Mounting over handlebar and switches Better control during winter ride-outs
Never again cold fingers! Mounting over handlebar and switches Better control during winter ride-outs
76502979144
Pris: 1020kr
Wrap-around handguard kit
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials Approvals: HOMNN_EU Material (PowerParts): Aluminium
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials Approvals: HOMNN_EU Material (PowerParts): Aluminium
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
79702984044
Pris: 1125kr
Wrap-around handguard kit
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials Approvals: HOMNN_EU Material (PowerParts): Aluminium
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials Approvals: HOMNN_EU Material (PowerParts): Aluminium
Handguard bushing kit
79702988044
Handguard kit
7960218204430
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
79102984000
Pris: 675kr
Wrap-around handguard kit
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
CLAMP INTERNAL
62002080053
SCREW FOR PLASTIC K50X18 T20
0081050181
AH-COLLAR SCREW M8X40 ISA45
0035080406
HH COLLAR SCREW M 6X30 SW=8
0025060306
EJOT PT SCREW K60X20 WS=6
0017060205
Collar nut M6x1 SW8
77336088106
Handguard kit
7960218204430
Handguard r/s l/s white
7960218204428
Handguard kit
79602182044AB
79102979000EB
Pris: 735kr
Wrap-around handguard kit
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
7910297900028
Pris: 735kr
Wrap-around handguard kit
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
7910297900030
Pris: 735kr
Wrap-around handguard kit
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
79602979044
Pris: 435kr
Wrap-around handguard kit
Made of robust plastic To convert the open, standard handguards to a closed version Usable with handguards 7960297900028/30AB and 2650297900028/30/AB
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Made of robust plastic To convert the open, standard handguards to a closed version Usable with handguards 7960297900028/30AB and 2650297900028/30/AB
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
AH-COLLAR SCREW M8X40 ISA45
0035080406
SCREW FOR PLASTIC K50X18 T20
0081050181
EJOT PT SCREW K60X20 WS=6
0017060205
Factory Racing handguard kit
7960297900030
Factory Racing handguard kit
79602979000EB
Handguard kit
79602182044AB
79102979000AB
Pris: 735kr
Wrap-around handguard kit
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Made of robust plastic Fastening independent of fittings directly on the handlebars To convert the open, standard handguards to a closed version Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Lock-on grip set
A46002921500EB
Lock-on grip set
79002923000
Lock-on grip set
79002923100
Lock-on grip set
A46002921500BJ
Handguard sticker set
77702984000
59001039144
Pris: 885kr
Handlebar mount kit
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU Material (PowerParts): Aluminium
For conversion from 22 mm-diameter handlebars to handlebars with a diameter of 28 mm.
Approvals: CCCUO_EU Material (PowerParts): Aluminium
79701939144
Välj
32 (Lagerstatus: 3) 37 (Lagerstatus: 2) 42 (Lagerstatus: 1) 47 (Lagerstatus: 2024-11-04) 52 (Lagerstatus: 1)
Pris: 560kr
Handlebar mount kit
Available in five different heights.
Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Approvals: EC-V Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 37
Visa hela beskrivningen
Available in five different heights.
Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.
Approvals: EC-V Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 37
AH-COLLAR SCREW M10X35 ISA45
0032100356S
54801043020
Pris: 345kr
Handlebar riser
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 20
Visa hela beskrivningen
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 20
AH SCREW DIN6912-M10X45 10.9
0912100456
54801043012
Pris: 345kr
Handlebar riser
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 12
Visa hela beskrivningen
Can only be fitted in combination with handlebar support 5900103920001S (standard on EXC models up to MY 2011).
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 12
AH SCREW DIN6912-M10X45 10.9
0912100456
77701939020
Välj
10 (Lagerstatus: 1) 20 (Lagerstatus: 2) 30 (Lagerstatus: 2)
Pris: 675kr
Handlebar riser
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 20
Visa hela beskrivningen
These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.
Approvals: CCCUO_EU Surface (PowerParts): Anodized Material (PowerParts): Aluminium Height (PowerParts): 20
HH COLLAR SCREW M 8X30 WS=10
0025080306
SXS07125200
Pris: 2255kr
Progressive handlebar damping system (PHDS)
CNC milled handlebar mount with damping rubber inserts Gentle on wrists and shoulder joints Damping of hard shocks Absorption of chassis and engine vibrations Additional handlebar damping in horizontal direction Optimum steering precision Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment Handlebar height adjustable to 2 positions
Approvals: EC-V Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled handlebar mount with damping rubber inserts Gentle on wrists and shoulder joints Damping of hard shocks Absorption of chassis and engine vibrations Additional handlebar damping in horizontal direction Optimum steering precision Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment Handlebar height adjustable to 2 positions
Approvals: EC-V Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Handlebar pad
SXS07250800
PHDS bracket for Factory steering damper
77012005644
Handlebar pad
79002901050
Smartphone handlebar pad
79702902000
HH COLLAR SCREW M 8X45 WS=10
0015080453
ELASTOMER GREEN/SOFT
SXS05125203
ELASTOMER YELLOW/MEDIUM
SXS05125204
ELASTOMER RED/HARD
SXS05125205
UPPER PAN PHDS
SXS07125208
AH SCREW DIN6912-M10X25,10.9
0032100256S
AH-COLLAR SCREW M10X35 ISA45
0032100356S
5480200130004
Pris: 1125kr
Handlebar
Made of high-strength aluminum Tested in complex and specially-developed test cycles Position markings for easy adjustment Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high-strength aluminum Tested in complex and specially-developed test cycles Position markings for easy adjustment Dimensions: A = 115 mm, B = 806 mm, C = 62 mm
Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
26202901000
Pris: 2255kr
ProTaper handlebar
Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:
When locked, the crossbar is solid (stiff) When unlocked, the crossbar is flexible Dimensions: A = 112 mm, B = 811 mm, C = 88 mm
Approvals: CCCUO_EU Diameter: 28 mm Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
Upgrade your bike with this factory handlebar and make use of the advantages of an adjustable crossbar, depending on the track ground:
When locked, the crossbar is solid (stiff) When unlocked, the crossbar is flexible Dimensions: A = 112 mm, B = 811 mm, C = 88 mm
Approvals: CCCUO_EU Diameter: 28 mm Factory Racing: USED BY FACTORY RACING
7950290100004
Pris: 2265kr
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
79502901000C1
Pris: 2265kr
Renthal Twinwall handlebar
Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 996
Dimensions: A = 118 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
25-9991-04
Pris: 2549kr
Renthal Twinwall handlebar
The Twinwall, in the KTM orange design Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
The Twinwall, in the KTM orange design Two handlebars in one The exterior ensures maximum resistance to external damage (e.g. fall) Additionally hard anodised against corrosion The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls Very good flex properties Comes with handlebar pad Renthal Twinwall 999
Dimensions: A = 104 mm, B = 811 mm, C = 74 mm
Approvals: CCCUO_EU Colour: Orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77711979000
Pris: 175kr
Auxiliary wiring harness
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Visa hela beskrivningen
Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off.
Auxiliary wiring harness
77711979010
Auxiliary wiring harness
77711979044
77711979010
Pris: 100kr
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000.
Auxiliary wiring harness
77711979000
77711979044
Pris: 325kr
Auxiliary wiring harness
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Visa hela beskrivningen
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 77711979000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
Auxiliary wiring harness
77711979000
Pull switch bracket
77711969044
78112920044
Pris: 150kr
Hourmeter bracket
To assemble the hour counter on the triple clamp.
To assemble the hour counter on the triple clamp.
7871399204404
Pris: 560kr
Brake lever
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight with technical and ergonomic added value Adjustable grip width Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight with technical and ergonomic added value Adjustable grip width Approvals: CCCUO_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Clutch lever
7800293120004
7800293120004
Pris: 295kr
Clutch lever
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight with technical and ergonomic added value Ergonomically perfect shape (the result of years of racing experience) Adjustable grip width Suitable for all hydraulic Brembo® clutch mountings.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Weight: 0.055
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight with technical and ergonomic added value Ergonomically perfect shape (the result of years of racing experience) Adjustable grip width Suitable for all hydraulic Brembo® clutch mountings.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium Weight: 0.055
Brake lever
7871399204404
77702944000
Pris: 220kr
Clamp
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Including plastic insert Reduces the risk of a lever being broken Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Including plastic insert Reduces the risk of a lever being broken Suitable for all Brembo® and Formula brake and clutch assembles
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
54802005000
Pris: 175kr
Handlebar ends
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Prevents the hand grips from chafing in the event of a fall Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Prevents the hand grips from chafing in the event of a fall Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
FLAT HEAD SCREW DIN7991-M 6X50
0991060503
hex nut DIN 934 M6
0934060003
79002901050
Pris: 435kr
Handlebar pad
Already mandatory in many competitions Provides optimum protection Visual highlight With the integrated card holder you always have the time in view.
A small extra pocket allows you to stow small items.
Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
Already mandatory in many competitions Provides optimum protection Visual highlight With the integrated card holder you always have the time in view.
A small extra pocket allows you to stow small items.
Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU Colour: Orange
SXS07250800
Pris: 295kr
Handlebar pad
Already mandatory in many competitions Provides optimum protection Visual highlight Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU Colour: Orange
Already mandatory in many competitions Provides optimum protection Visual highlight Can also be fitted in combination with the PHDS-handlebar support.
Approvals: HOMNN_EU Colour: Orange
79702902000
Pris: 345kr
Smartphone handlebar pad
Protects your valuable smartphone from rain, dust or mud Touchscreen remains fully functional Handlebar pad and smartphone holder in one Smartphone cover with velcro fastener attached to the handlebar pad Smartphone can be easily removed with its cover Optimal solution for quick and secure fastening of your smartphone on the vehicle For Smartphones up to 160 x 80 mm Comes with two separate protective strips in case the sleeve is not used Can also be fitted in combination with the PHDS-handlebar support Smartphone not included!
Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
Protects your valuable smartphone from rain, dust or mud Touchscreen remains fully functional Handlebar pad and smartphone holder in one Smartphone cover with velcro fastener attached to the handlebar pad Smartphone can be easily removed with its cover Optimal solution for quick and secure fastening of your smartphone on the vehicle For Smartphones up to 160 x 80 mm Comes with two separate protective strips in case the sleeve is not used Can also be fitted in combination with the PHDS-handlebar support Smartphone not included!
Approvals: HOMNN_EU Colour: Orange
58512050100
Pris: 6770kr
Factory Racing steering damper
High-end steering damper Maximum control on fast tracks Gain in stability at the front wheel Fully adjustable Well thought-out mounting of the damper enables individual handlebar adjustment Reduced weight Sensitive response behavior High speed DCC Developed according to the requirements of our factory drivers Optimum 25 click setting range. Proven success with the KTM Works Rally Team. For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Gold Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
High-end steering damper Maximum control on fast tracks Gain in stability at the front wheel Fully adjustable Well thought-out mounting of the damper enables individual handlebar adjustment Reduced weight Sensitive response behavior High speed DCC Developed according to the requirements of our factory drivers Optimum 25 click setting range. Proven success with the KTM Works Rally Team. For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required
Approvals: CCCUO_EU Colour: Gold Factory Racing: USED BY FACTORY RACING
Steering damper bracket
58512050044
Steering damper bracket
58512050144
Steering damper counter bearing
77212905444
Steering damper bracket
79012960100
Steering damper counter bearing
79012970100
Steering damper bracket
63512905150
77012005144
Pris: 785kr
Factory steering damper bracket
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
PHDS bracket for Factory steering damper
77012005644
AH SCREW DIN0912-M 8X25
0912080253
58512050144
Pris: 785kr
Steering damper bracket
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Approvals: HOMNN_EU Material (PowerParts): Aluminium
PHDS bracket for Factory steering damper
77012005644
AH SCREW DIN0912-M 6X25 10.9
0912060255
Factory Racing steering damper
58512050100
Steering damper counter bearing
79012970100
A46009945000
Pris: 510kr
Crash bung kit
Protects from damage in the event of a fall Easy to mount
Colour: Black Alignment: Front
Protects from damage in the event of a fall Easy to mount
Colour: Black Alignment: Front
77709945000
Pris: 455kr
Crash bung kit
Protects from damage in the event of a fall Easy to mount Protects the fork
Approvals: HOMNN_EU Colour: Black Alignment: Front
Protects from damage in the event of a fall Easy to mount Protects the fork
Approvals: HOMNN_EU Colour: Black Alignment: Front
78110945100
Pris: 455kr
Crash bung kit
Protects from damage in the event of a fall Easy to mount Protects the swing arm
Approvals: HOMNN_EU Colour: Black Alignment: Rear
Protects from damage in the event of a fall Easy to mount Protects the swing arm
Approvals: HOMNN_EU Colour: Black Alignment: Rear
A49001997000
Pris: 400kr
Dirt scraper
Resistant to the toughest stresses and strains Ideal protection for sealing the fork Mounted directly on the fork Approvals: HOMNN_EU Colour: Red Material (PowerParts): Plastic
Resistant to the toughest stresses and strains Ideal protection for sealing the fork Mounted directly on the fork Approvals: HOMNN_EU Colour: Red Material (PowerParts): Plastic
A46001995000
Pris: 335kr
Fork protector
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector Approvals: HOMNN_EU Colour: Black Material (PowerParts): Neoprene
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector Approvals: HOMNN_EU Colour: Black Material (PowerParts): Neoprene
A46001996000
Pris: 335kr
Fork protector
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector Approvals: HOMNN_EU Colour: Black Material (PowerParts): Neoprene
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector Approvals: HOMNN_EU Colour: Black Material (PowerParts): Neoprene
79601994000
Pris: 345kr
Fork shoe protection kit
Protects the fork shoes from damage Easy to mount
Protects the fork shoes from damage Easy to mount
HH COLLAR SCREW M 8X30 WS=10
0025080306
7720309400004
Pris: 400kr
Frame protection set
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side.
Approvals: HOMNN_EU Colour: Orange
Reliably prevents damage to the powder coating by dirt, crashes or the rider's boots. Also protects trousers and boots from burns on the exhaust side.
Approvals: HOMNN_EU Colour: Orange
BLIND PLUG-IN NUT M5 WN 22A 03
54803092050
BUSH F. FRAME PROTECTION 03
54803092060
COU.SUNK SCR. AH ISO7380 M5X25
0738050250
78108999020
Pris: 110kr
Triple clamp protective film kit
Extra thick film protects the triple clamp from stone impacts. For use with triple clamp 7810199902004 and 7810199902204.
Approvals: HOMNN_EU Colour: Transparent
Extra thick film protects the triple clamp from stone impacts. For use with triple clamp 7810199902004 and 7810199902204.
Approvals: HOMNN_EU Colour: Transparent
Triple clamp
7810199902004
Triple clamp
7810199902204
59003990250
Pris: 110kr
Foam rubber
Reduces dirt deposits between engine and skid plate Provides better cooling of the engine Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Reduces dirt deposits between engine and skid plate Provides better cooling of the engine Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
77232975044
Pris: 845kr
Clutch slave cylinder protection
DO YOU KNOW about the benefits of the KTM case guard?
Prevents damage to the engine case in the event of the chain breaking No pulling-in of stones between chain and engine case (material-friendly) CNC-machined from high-strength aluminum Best possible and effective protection for the clutch slave cylinder
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Visa hela beskrivningen
DO YOU KNOW about the benefits of the KTM case guard?
Prevents damage to the engine case in the event of the chain breaking No pulling-in of stones between chain and engine case (material-friendly) CNC-machined from high-strength aluminum Best possible and effective protection for the clutch slave cylinder
Approvals: HOMNN_EU Material (PowerParts): Aluminium
77203990200
Pris: 1125kr
Skid plate
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:
Exceptionally robust rear fastening clamp Made of 4 mm strong, high-tensile, robust aluminum Extremely durable and endurance-tested for the toughest off-road use Custom design - specifically developed for KTM models Highest grade quality workmanship Simple and quick assembly
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Visa hela beskrivningen
This generation of KTM aluminum skid plates offers the most effective protection for frame and engine:
Exceptionally robust rear fastening clamp Made of 4 mm strong, high-tensile, robust aluminum Extremely durable and endurance-tested for the toughest off-road use Custom design - specifically developed for KTM models Highest grade quality workmanship Simple and quick assembly
Approvals: HOMNN_EU Material (PowerParts): Aluminium
SHIMSTRIPE 1000X11X3
78103190030
BRACKET SKID-PLATE
77203990060
HH COLLAR SCREW M 6X15 WS=8
0024060156
78907940050
Pris: 965kr
Factory Racing seat cover
This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design. For standard height seats.
Approvals: HOMNN_EU Colour: Blue Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
This seat cover with transversely stitched ribs ensures maximum support with unrestricted freedom of movement thanks to its special design. For standard height seats.
Approvals: HOMNN_EU Colour: Blue Factory Racing: USED BY FACTORY RACING
77707040100
Pris: 1705kr
Factory seat
With its blue cover, this seat suits the current factory-style graphics kits. Standard height.
Approvals: HOMNN_EU Colour: Blue
With its blue cover, this seat suits the current factory-style graphics kits. Standard height.
Approvals: HOMNN_EU Colour: Blue
SEAT COVER BLUE
77707040150
77207940900
Pris: 1690kr
Factory seat
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height.
Approvals: HOMNN_EU Colour: Black
This seat provides great freedom of movement, but still a perfect hold. The "wave surface" acts as a step even though it isn't one. Standard height.
Approvals: HOMNN_EU Colour: Black
SEAT COVER WAVE
77207940550
77707940050
Pris: 965kr
Factory seat cover
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats.
Approvals: HOMNN_EU Colour: Black
What backs up the rear of Cairoli and Co on the bike? No-less than this waffle-shaped and extremely robust factory seat cover. Why not try it out yourself? For standard height seats.
Approvals: HOMNN_EU Colour: Black
77207940600
Pris: 1690kr
Seat
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Approvals: HOMNN_EU Height (PowerParts): -15
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.
Approvals: HOMNN_EU Height (PowerParts): -15
79407978000
Pris: 130kr
Seat pocket
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
77207940800
Pris: 1575kr
Step up seat
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height.
Approvals: HOMNN_EU Colour: Black
The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle. Standard height.
Approvals: HOMNN_EU Colour: Black
A61029974000
Pris: 2985kr
Battery Charging and testing unit
The charger is supplied without a connection cable. A cable with a socket connector suitable for the respective country must be ordered separately.
Testing, charging and keeping batteries healthy Fully automatic and protective battery charging thanks to programmed charging characteristics Short-circuit protection Reverse polarity protection Universal for many battery types (Pb, LiFePo4) Charging with constant current, or with a special current control program Trickle charging during diagnostics / troubleshooting on the vehicle Low battery voltage recovery mode (BMS, battery management system) Optimises battery performance and service life Precise battery monitoring
Type: Mandatory Technical Details: Ladekabel Länge ca.: 2 m
Visa hela beskrivningen
The charger is supplied without a connection cable. A cable with a socket connector suitable for the respective country must be ordered separately.
Testing, charging and keeping batteries healthy Fully automatic and protective battery charging thanks to programmed charging characteristics Short-circuit protection Reverse polarity protection Universal for many battery types (Pb, LiFePo4) Charging with constant current, or with a special current control program Trickle charging during diagnostics / troubleshooting on the vehicle Low battery voltage recovery mode (BMS, battery management system) Optimises battery performance and service life Precise battery monitoring
Type: Mandatory Technical Details: Ladekabel Länge ca.: 2 m
78913914100
Pris: 1125kr
Brake caliper support
Made of high-strength aluminum Improved braking performance Required for using a 270 mm brake disc and 2-piston Brembo brake caliper.
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized
Visa hela beskrivningen
Made of high-strength aluminum Improved braking performance Required for using a 270 mm brake disc and 2-piston Brembo brake caliper.
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized
Flame brake disc
78909960000
A46002941010
Pris: 855kr
Factory Racing clutch master cylinder protection
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Visa hela beskrivningen
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Factory Racing master cylinder protection
A46002940010
A46002940010
Pris: 855kr
Factory Racing master cylinder protection
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Visa hela beskrivningen
Perfect fit Made of high-quality carbon Optimal protection against stone impact
Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING Material (PowerParts): Carbon
Factory Racing clutch master cylinder protection
A46002941010
78909960000
Pris: 1805kr
Flame brake disc
Floating Inner ring anodised Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added braking performance Approvals: ABE Colour: Black Diameter: 270 mm Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
Visa hela beskrivningen
Floating Inner ring anodised Outer ring made of stainless high-performance brake steel Minimal wear on brake pads With Flame design for added braking performance Approvals: ABE Colour: Black Diameter: 270 mm Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Front
Brake caliper support
78913914100
77707988017
Pris: 560kr
Factory Racing fuel pump connection
Developed according to the requirements of our factory drivers Allows tighter fuel hose routing along the engine Prevents unintentional disconnection of the fuel hose in off-road applications Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING
Visa hela beskrivningen
Developed according to the requirements of our factory drivers Allows tighter fuel hose routing along the engine Prevents unintentional disconnection of the fuel hose in off-road applications Approvals: HOMNN_EU Factory Racing: USED BY FACTORY RACING
HOSE CLAMP GEMI 10-16
58335099000
O-RING 6,00X2,00 NBR 70
0770060020
79007913044
Pris: 345kr
Fuel connection
Particularly safe due to clever design Clutch is secured by simply twisting the connection
Particularly safe due to clever design Clutch is secured by simply twisting the connection
7723199700004
Pris: 295kr
Vent hose
For tank and carburetor bleeding Gasoline resistant Can only be used for bleeding purposes Cannot be used as a connection between tank and carburetor! Approvals: HOMNN_EU Colour: Orange
For tank and carburetor bleeding Gasoline resistant Can only be used for bleeding purposes Cannot be used as a connection between tank and carburetor! Approvals: HOMNN_EU Colour: Orange
79129955000BJC
Pris: 1575kr
Bike stand
Robust, solid construction Modern and simple design Easy to mount New bike stand generation Plastic - aluminum combined for highest stiffness Extremely stable due to a broad stand design Top plate in 2k injection molding technology Side plates for graphics mounting Use either the supplied, or your own graphics
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium Height (PowerParts): 430
Visa hela beskrivningen
Robust, solid construction Modern and simple design Easy to mount New bike stand generation Plastic - aluminum combined for highest stiffness Extremely stable due to a broad stand design Top plate in 2k injection molding technology Side plates for graphics mounting Use either the supplied, or your own graphics
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium Height (PowerParts): 430
79129955000EBA
Pris: 1575kr
Bike stand
Robust, solid construction Modern and simple design Easy to mount New bike stand generation Plastic - aluminum combined for highest stiffness Extremely stable due to a broad stand design Top plate in 2k injection molding technology Side plates for graphics mounting Use either the supplied, or your own graphics
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium Height (PowerParts): 430
Visa hela beskrivningen
Robust, solid construction Modern and simple design Easy to mount New bike stand generation Plastic - aluminum combined for highest stiffness Extremely stable due to a broad stand design Top plate in 2k injection molding technology Side plates for graphics mounting Use either the supplied, or your own graphics
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Aluminium Height (PowerParts): 430
78129955100
Pris: 965kr
Lift stand
Tool for lifting the motorcycle Secure stand for your bike Stroke: 315/425 mm
Maximum load: 150kg
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Powder-coated Material (PowerParts): Steel Type: Recommended
Visa hela beskrivningen
Tool for lifting the motorcycle Secure stand for your bike Stroke: 315/425 mm
Maximum load: 150kg
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Powder-coated Material (PowerParts): Steel Type: Recommended
U6922500
Pris: 2150kr
MATRIX A2 bike stand
Secure stand for your bike Aluminum construction with non-slip underlay so the motorcycle does not slip during washing
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Height (PowerParts): 440 Type: Kein Fahrzeug
Visa hela beskrivningen
Secure stand for your bike Aluminum construction with non-slip underlay so the motorcycle does not slip during washing
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Aluminium Height (PowerParts): 440 Type: Kein Fahrzeug
79029094000
Pris: 330kr
Multi plug-in stand
Plug-in stand and fork support in one part Two tools in one Saves space when transporting your motorcycle Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much After transport, the tool serves as a perfect plug-in stand!
Visa hela beskrivningen
Plug-in stand and fork support in one part Two tools in one Saves space when transporting your motorcycle Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much After transport, the tool serves as a perfect plug-in stand!
77703020000
Pris: 345kr
Plug-in stand
Saves space when transporting your motorcycle Approvals: HOMNN_EU Material (PowerParts): Steel
Saves space when transporting your motorcycle Approvals: HOMNN_EU Material (PowerParts): Steel
7720699800004
Pris: 150kr
Air filter cover
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box.
Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box.
A61029974044
Pris: 3110kr
Battery charging and testing unit
Testing, charging and keeping batteries fresh Fully automatic and economical battery charging by means of programmed charge characteristic Short-circuit protection Reverse polarity protection Can be used for several types of batteries (Pb, LiFePo4) Charging with a specific power control program Trickle charge during diagnostic or flashing the vehicle Recovery mode for low battery voltage (BMS, battery management system) Optimizes battery performance and service life Including power supply cable type EU
Approvals: HOMNN_EU Not Available In: Vereinigte Arabische Emirate
Visa hela beskrivningen
Testing, charging and keeping batteries fresh Fully automatic and economical battery charging by means of programmed charge characteristic Short-circuit protection Reverse polarity protection Can be used for several types of batteries (Pb, LiFePo4) Charging with a specific power control program Trickle charge during diagnostic or flashing the vehicle Recovery mode for low battery voltage (BMS, battery management system) Optimizes battery performance and service life Including power supply cable type EU
Approvals: HOMNN_EU Not Available In: Vereinigte Arabische Emirate
Battery charging and testing unit
A61029974144
00029901000
Pris: 325kr
Bead buddy
The Bead Buddy acts as your third hand when fitting tires Holds the tire in the tire bed, thereby making tire fitting much easier Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
The Bead Buddy acts as your third hand when fitting tires Holds the tire in the tire bed, thereby making tire fitting much easier Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77719910100
Pris: 345kr
C-Spanner
Practical tool for setting preload on the shock absorber without having to remove it.
Practical tool for setting preload on the shock absorber without having to remove it.
00029940000
Pris: 230kr
Cable organizer
Easy handling and operation More safety Less wear on the cord Made of high quality material Cable not included
Approvals: HOMNN_EU Colour: Black Diameter: 400 mm
Visa hela beskrivningen
Easy handling and operation More safety Less wear on the cord Made of high quality material Cable not included
Approvals: HOMNN_EU Colour: Black Diameter: 400 mm
U6951130
Pris: 110kr
Cable tie
100x, length:20 cm.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
100x, length:20 cm.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
35-2801
Pris: 295kr
Chain breaker
5/8 x 1/4".
Approvals: HOMNN_EU Chain Pitch: 520
5/8 x 1/4".
Approvals: HOMNN_EU Chain Pitch: 520
00029920000EB
Pris: 235kr
Chain gauge
Patented gage for two important checks Check and adjust chain tension Check chain lengthening (wear)
Approvals: HOMNN_EU Colour: Electronic orange Material (PowerParts): Plastic
Visa hela beskrivningen
Patented gage for two important checks Check and adjust chain tension Check chain lengthening (wear)
Approvals: HOMNN_EU Colour: Electronic orange Material (PowerParts): Plastic
00029920000C1
Pris: 230kr
Chain gauge
Patented gage for two important checks: Check and adjust chain tension Check chain lengthening (wear)
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Patented gage for two important checks: Check and adjust chain tension Check chain lengthening (wear)
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
00029016100
Pris: 400kr
Combination tool
For removing the screw caps Fits all closed cartridge forks
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
For removing the screw caps Fits all closed cartridge forks
Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium
79129941100
Pris: 235kr
Feeler gauge
100 mm length 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm
Visa hela beskrivningen
100 mm length 20 blades: 0,05 - 0,1 - 0,15 - 0,2 - 0,25 - 0,3- 0,35 - 0,4 - 0,45 - 0,5 - 0,55 - 0,6 - 0,65 - 0,7 - 0,75 - 0,8 - 0,85 - 0,9 - 0,95 - 1,0 mm
60412002200
Pris: 175kr
First aid kit
Contents are in accordance with DIN standard 13167-2014 for motorcyclists Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).
Approvals: HOMNN_EU Colour: Red
Visa hela beskrivningen
Contents are in accordance with DIN standard 13167-2014 for motorcyclists Note: It is mandatory to carry a first aid kit in many countries (such as Austria, Italy, Portugal and Spain).
Approvals: HOMNN_EU Colour: Red
A54029994500
Pris: 345kr
Fork seal doctor
This clever tool is a must for every motorcycle toolbox With it, you can remove dirt from your fork seals effortlessly No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over For all 48 mm forks
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
This clever tool is a must for every motorcycle toolbox With it, you can remove dirt from your fork seals effortlessly No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over For all 48 mm forks
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
59029050000
Pris: 110kr
Funnel
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
Visa hela beskrivningen
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
A54029963000
Pris: 110kr
Measuring cup
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
Approvals: HOMNN_EU Colour: Transparent Volume: 1
Visa hela beskrivningen
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
Approvals: HOMNN_EU Colour: Transparent Volume: 1
A54029935000C1
Pris: 100kr
Mud removal tool
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Visa hela beskrivningen
Use this to remove the dirt from your last mud battle with ease! A motorcycle grip rubber (not included) can be fitted to the grip.
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
00029997000
Pris: 855kr
Multi-purpose tool
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
Visa hela beskrivningen
The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; Inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25/30 and 40/45 Torx; bottle opener; Option for attaching for 3/8 "and 1/4" socket wrench.
7802906500004
Pris: 110kr
Oil bottle
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Approvals: HOMNN_EU Colour: Transparent Volume: 0.25
Visa hela beskrivningen
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
Approvals: HOMNN_EU Colour: Transparent Volume: 0.25
79012030100C1
Pris: 90kr
Plug
Keeps water out of the silencer during cleaning For inner-diameter of 15-37 mm
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Keeps water out of the silencer during cleaning For inner-diameter of 15-37 mm
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
A46012950000
Pris: 110kr
Plug
Keeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Keeps water out of the silencer during cleaning. For inner-diameter of 22-42 mm
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic
Air filter cover
A46006998000
54812016000
Pris: 435kr
Safety wire
200 m Wire with 0.61 mm diameter.
Approvals: HOMNN_EU Diameter: 0,61 mm
200 m Wire with 0.61 mm diameter.
Approvals: HOMNN_EU Diameter: 0,61 mm
00029090200
Pris: 625kr
Sag scale
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
Makes setting the sag significantly simpler. Folding version for easy stowing in the tool box.
00029990010
Pris: 110kr
Sag scale pin
Extra pin For using the sag scale with larger axle diameters
Approvals: HOMNN_EU Material (PowerParts): Aluminium
Extra pin For using the sag scale with larger axle diameters
Approvals: HOMNN_EU Material (PowerParts): Aluminium
00029999300
Pris: 1125kr
Screw kit
Contains all the most-used bolts and small parts for current Offroad models 30 % saving compared with purchasing individual parts
Contains all the most-used bolts and small parts for current Offroad models 30 % saving compared with purchasing individual parts
7802996200030
Pris: 175kr
Screw pan
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Approvals: HOMNN_EU Colour: Black
Magnetic. Never lose a bolt again!
Perfect for use in combination with the SX stand.
Approvals: HOMNN_EU Colour: Black
00029098200
Pris: 295kr
Screwdriver kit
High quality, 5-piece screwdriver set in the KTM design.
Approvals: HOMNN_EU Colour: Black
High quality, 5-piece screwdriver set in the KTM design.
Approvals: HOMNN_EU Colour: Black
7802906400004
Pris: 65kr
Spark plug box
With space for storing fuses.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
With space for storing fuses.
Approvals: HOMNN_EU Colour: Orange Material (PowerParts): Plastic
A46019909000
Pris: 2515kr
Spoke torque wrench
On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples.
Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes.
Wrench size 6.8 mm.
Visa hela beskrivningen
On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples.
Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes.
Wrench size 6.8 mm.
50305017000C1
Pris: 150kr
Spring hook
Comfortable unhooking of springs Convenient and easy to use Easy handling and operation Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Type: Recommended
Comfortable unhooking of springs Convenient and easy to use Easy handling and operation Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel Type: Recommended
00010000353
Pris: 965kr
Tire lever set
There's racing experience here as well!
Practical tyre lever set, consisting of
3 x short version 51012092100 3 x long version 51012093100
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel
Visa hela beskrivningen
There's racing experience here as well!
Practical tyre lever set, consisting of
3 x short version 51012092100 3 x long version 51012093100
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Steel
58312078000
Pris: 175kr
Tool bag
The optimum solution for always having the most important tools to hand when on the road.
The optimum solution for always having the most important tools to hand when on the road.
00029098400
Pris: 2030kr
Toolbox
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
Ratchet (with locking device), lever, two extensions and socket wrench Hexagon sockets from 6 to 24 Allen keys from 3 to 10 Phillips and slotted bits Torx bits from 15 to 55 With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
Ratchet (with locking device), lever, two extensions and socket wrench Hexagon sockets from 6 to 24 Allen keys from 3 to 10 Phillips and slotted bits Torx bits from 15 to 55 With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Approvals: HOMNN_EU Colour: Orange
00029098300
Pris: 855kr
Toolbox
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
Ratchet (with locking device), lever, two extensions and socket wrench Hexagon sockets from 4 to 14 Allen keys from 3 to 8 Phillips, slotted and Torx bits With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
Visa hela beskrivningen
38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools.
Content:
Ratchet (with locking device), lever, two extensions and socket wrench Hexagon sockets from 4 to 14 Allen keys from 3 to 8 Phillips, slotted and Torx bits With this, small jobs on your KTM can be completed quickly and reliably. Whether you're removing fairings or changing the oil, you'll definitely find the right tool here.
00029996000
Pris: 3040kr
Torque wrench
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm Push-on ratchet ¼" Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
Visa hela beskrivningen
High-quality, adjustable torque wrench 5-25 NM, including the following accessories:
Push-on spoke wrenches in sizes 5.65 and 6.95 mm Push-on ratchet ¼" Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx
78129984000
Pris: 1125kr
Tyre lever kit
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Visa hela beskrivningen
Made of high strength, orange anodized aluminum; not suitable for tire mounting with mousse. With integrated ring wrench SW 32, 27, 17, 13 and 10 mm.
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
77329068000
Pris: 455kr
Tyre pressure gauge
Comfortable and easy to use Fits all standard valves. Pressure display in bar or psi Integrated pressure release valve for accurate pressure adjustment Disengageable display and work area lighting Energy-saving function with automatic cut-off Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU Colour: Black
Visa hela beskrivningen
Comfortable and easy to use Fits all standard valves. Pressure display in bar or psi Integrated pressure release valve for accurate pressure adjustment Disengageable display and work area lighting Energy-saving function with automatic cut-off Maximum measuring pressure: 11 bar
Approvals: HOMNN_EU Colour: Black
54829068000
Pris: 345kr
Tyre pressure gauge
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Visa hela beskrivningen
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
81212016100
Pris: 110kr
Wash cap fuel hose
Use highly recommended when washing the bike thoroughly; in other words, when the fuel tank is removed. Prevents water from entering the fuel line.
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic Type: Recommended
Visa hela beskrivningen
Use highly recommended when washing the bike thoroughly; in other words, when the fuel tank is removed. Prevents water from entering the fuel line.
Approvals: HOMNN_EU Colour: Black Material (PowerParts): Plastic Type: Recommended
58310025100
Pris: 570kr
Wheel alignment gauge
The ideal tool for checking perfect wheel position when tensioning the chain.
The ideal tool for checking perfect wheel position when tensioning the chain.
00029015100
Pris: 560kr
Wire pliers
Recommended, very practical, high quality tool to help you twist safety wire 54812016000 like a professional.
Recommended, very practical, high quality tool to help you twist safety wire 54812016000 like a professional.
U6951277
Pris: 2255kr
Bike ramp
Highest quality workmanship Including straps It withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm.
Approvals: HOMNN_EU Material (PowerParts): Aluminium Weight: 5.5
Visa hela beskrivningen
Highest quality workmanship Including straps It withstands a load of 180 kg. The total length is approx.200 cm, folded approx.100 cm.
Approvals: HOMNN_EU Material (PowerParts): Aluminium Weight: 5.5
61012016000
Pris: 110kr
Brake lock
Practical help when loading the bike or jacking up with the rear wheel lifting device
Practical help when loading the bike or jacking up with the rear wheel lifting device
A54012928000
Pris: 5640kr
Case
Perfect for all on the move Exceptionally robust Note Can be used with XACT/ XPLOR forks and shocks Dimensions L=44,09 inch / W=16,14 inch / H=6,30 inch
Visa hela beskrivningen
Perfect for all on the move Exceptionally robust Note Can be used with XACT/ XPLOR forks and shocks Dimensions L=44,09 inch / W=16,14 inch / H=6,30 inch
54829094100
Pris: 220kr
Fork support
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much Is clamped between the bottom of the front fender and tyre
Visa hela beskrivningen
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much Is clamped between the bottom of the front fender and tyre
SXS05125600
Pris: 110kr
Grip protection set
77512950300
Pris: 220kr
Lashing strap set
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops Perfect for extending lashing straps with hooks or carabiners
Approvals: HOMNN_EU Colour: Black
Visa hela beskrivningen
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops Perfect for extending lashing straps with hooks or carabiners
Approvals: HOMNN_EU Colour: Black
77512950200
Pris: 560kr
Lashing strap set
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops With rubberized hooks on belt ends
Approvals: HOMNN_EU Colour: Black
Visa hela beskrivningen
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops With rubberized hooks on belt ends
Approvals: HOMNN_EU Colour: Black
79412950000
Pris: 560kr
Lashing strap set
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops With rubberised hooks and carabiner on belt ends Approvals: HOMNN_EU Colour: Black
Visa hela beskrivningen
Enables secure fastening of the machine Protects handlebar and tank from scratches Made from durable ballistic nylon Load capacity of 280 kg With handlebar loops With rubberised hooks and carabiner on belt ends Approvals: HOMNN_EU Colour: Black
7811297310099
Pris: 900kr
Plastic drum
Transparent plastic canister including a flexible hose and screw cap For legal reasons, not to be used in some countries for storage and transportation of gasoline Approvals: CCCUO_EU Colour: Transparent Volume: 20
Visa hela beskrivningen
Transparent plastic canister including a flexible hose and screw cap For legal reasons, not to be used in some countries for storage and transportation of gasoline Approvals: CCCUO_EU Colour: Transparent Volume: 20
62512007000
Pris: 1125kr
Protective indoor cover
Protects the motorcycle from dust, scratches and the like The indoor bike cover makes every KTM an eye-catcher in the garage Completely dust and dirt-impermeable fabric Material with special structure The inside is softly padded Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
Protects the motorcycle from dust, scratches and the like The indoor bike cover makes every KTM an eye-catcher in the garage Completely dust and dirt-impermeable fabric Material with special structure The inside is softly padded Approvals: HOMNN_EU Colour: Orange
61312007000
Pris: 1125kr
Protective outdoor cover
Guaranteed perfect protection in all seasons Made of exclusive, pigmented fabric Includes practical carrying bag Protects the motorcycle from dust, scratches and the like Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
Guaranteed perfect protection in all seasons Made of exclusive, pigmented fabric Includes practical carrying bag Protects the motorcycle from dust, scratches and the like Approvals: HOMNN_EU Colour: Orange
59012007000
Pris: 965kr
Protective outdoor cover
Guaranteed perfect protection in all seasons Made of exclusive, pigmented fabric Includes practical carrying bag Protects the motorcycle from dust, scratches and the like Approvals: HOMNN_EU Colour: Orange
Visa hela beskrivningen
Guaranteed perfect protection in all seasons Made of exclusive, pigmented fabric Includes practical carrying bag Protects the motorcycle from dust, scratches and the like Approvals: HOMNN_EU Colour: Orange
79012906200
Pris: 1575kr
Service pit mat
This mat is already mandatory for many races Complies with FIM regulations The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Rubberised back The special KTM design will cause a sensation in your service zone Size: 170 cm x 100 cm
Visa hela beskrivningen
This mat is already mandatory for many races Complies with FIM regulations The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Rubberised back The special KTM design will cause a sensation in your service zone Size: 170 cm x 100 cm
52000194
Pris: 1575kr
Service pit mat
This mat is already mandatory for many races Complies with FIM regulations The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Rubberised back
Approvals: HOMNN_EU Type: Kein Fahrzeug
Visa hela beskrivningen
This mat is already mandatory for many races Complies with FIM regulations The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Rubberised back
Approvals: HOMNN_EU Type: Kein Fahrzeug
A49012906000
Pris: 1595kr
Service pit mat
This mat is already mandatory for many races The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Complies with FIM regulations Rubberised back Size: 200 cm x 100 cm
Visa hela beskrivningen
This mat is already mandatory for many races The special material mix absorbs overflowing fuel The mat also facilitates the retrieval of tools, screws and other small parts during service work Complies with FIM regulations Rubberised back Size: 200 cm x 100 cm
54812004000
Pris: 110kr
Transport cover
Provides optimum protection For rear sprockets up to 50T and 220 mm - 260 mm brake discs.
Provides optimum protection For rear sprockets up to 50T and 220 mm - 260 mm brake discs.
60012016000
Pris: 1575kr
U-lock
Made from high-tensile, durable steel Highest quality workmanship Double locking mechanism Locking cylinder with optimum protection against any attempts at manipulation Two keys supplied as standard Includes rotating PVC cover that protects the cylinder lock from dirt
Approvals: HOMNN_EU Material (PowerParts): Steel
Visa hela beskrivningen
Made from high-tensile, durable steel Highest quality workmanship Double locking mechanism Locking cylinder with optimum protection against any attempts at manipulation Two keys supplied as standard Includes rotating PVC cover that protects the cylinder lock from dirt
Approvals: HOMNN_EU Material (PowerParts): Steel
Bracket for U-lock
90112916044
77708990300
Pris: 1805kr
Factory graphics kit
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
Standard is just not your thing?
Customize your own jaw-dropping motorcycle and stand out from the competition.
79001994050
Pris: 275kr
Fork protector sticker set
For use with an open fork protector
For use with an open fork protector
78108999000
Pris: 225kr
Radiator protection grille sticker kit
7870898800038
Pris: 345kr
Start number backgrounds
4 parts
Approvals: HOMNN_EU Colour: Red
4 parts
Approvals: HOMNN_EU Colour: Red
322209
Välj
0 (Lagerstatus: 2024-11-04) 1 (Lagerstatus: 8) 2 (Lagerstatus: 3) 3 (Lagerstatus: 1) 4 (Lagerstatus: 2024-11-04) 5 (Lagerstatus: 18) 6 (Lagerstatus: 3) 7 (Lagerstatus: 1) 8 (Lagerstatus: 2) 9 (Lagerstatus: 2)
Pris: 35kr
Start numbers
13 cm Tall, 3 pieces each
Approvals: HOMNN_EU Start Number: 9
13 cm Tall, 3 pieces each
Approvals: HOMNN_EU Start Number: 9
322100
Välj
0 (Lagerstatus: 2) 1 (Lagerstatus: 4) 2 (Lagerstatus: 1) 3 (Lagerstatus: 4) 4 (Lagerstatus: 1) 5 (Lagerstatus: 1) 6 (Lagerstatus: 1) 7 (Lagerstatus: 1) 8 (Lagerstatus: 2024-11-04) 9 (Lagerstatus: 3)
Pris: 35kr
Start numbers
13 cm Tall, 3 pieces each
Approvals: HOMNN_EU Start Number: 0
13 cm Tall, 3 pieces each
Approvals: HOMNN_EU Start Number: 0
52000347
Pris: 165kr
Sticker sheet
Made of robust material Pre-cut stickers Approvals: HOMNN_EU Type: Kein Fahrzeug
Made of robust material Pre-cut stickers Approvals: HOMNN_EU Type: Kein Fahrzeug
7770600104430
Pris: 685kr
Air filter box
Approvals: HOMNN_EU Colour: Black
Approvals: HOMNN_EU Colour: Black
7770600104428
Pris: 685kr
Air filter box
Approvals: HOMNN_EU Colour: White
Approvals: HOMNN_EU Colour: White
7770600300004
Pris: 335kr
Air filter cover
Approvals: HOMNN_EU Colour: Black Alignment: Left
Approvals: HOMNN_EU Colour: Black Alignment: Left
7770600300028
Pris: 335kr
Air filter cover
Approvals: HOMNN_EU Colour: White
Approvals: HOMNN_EU Colour: White
7770600300030
Pris: 335kr
Air filter cover
Approvals: HOMNN_EU Colour: Black Alignment: Left
Approvals: HOMNN_EU Colour: Black Alignment: Left
7770600400030
Pris: 335kr
Air filter panel
Approvals: HOMNN_EU Colour: Black Alignment: Right
Approvals: HOMNN_EU Colour: Black Alignment: Right
7770801000028
Pris: 340kr
Fender
Approvals: HOMNN_EU Colour: White Alignment: Front
Approvals: HOMNN_EU Colour: White Alignment: Front
7770109410030A
Pris: 565kr
Fork protector kit
Approvals: HOMNN_EU Colour: Black
Approvals: HOMNN_EU Colour: Black
5900109410030
Pris: 405kr
Fork protector kit
Approvals: HOMNN_EU Colour: Black
Approvals: HOMNN_EU Colour: Black
Fork protector sticker set
59001094050
7770800704404
Pris: 340kr
FRONT NUMBER PLATE
Approvals: HOMNN_EU Colour: Orange
Approvals: HOMNN_EU Colour: Orange
7770800704428
Pris: 350kr
FRONT NUMBER PLATE
Approvals: HOMNN_EU Colour: White
Approvals: HOMNN_EU Colour: White
7770805400004
Pris: 675kr
Spoiler set
Approvals: HOMNN_EU Colour: Orange
Approvals: HOMNN_EU Colour: Orange
7770805410028
Pris: 675kr
Spoiler set
Approvals: HOMNN_EU Colour: Orange
Approvals: HOMNN_EU Colour: Orange
7720801300028
Pris: 475kr
Tail section
Approvals: HOMNN_EU Colour: White
Approvals: HOMNN_EU Colour: White
7720801300030
Pris: 530kr
Tail section
Approvals: HOMNN_EU Colour: Black
Approvals: HOMNN_EU Colour: Black
7720801300004
Pris: 560kr
Tail section
Approvals: HOMNN_EU Colour: Orange
Approvals: HOMNN_EU Colour: Orange
7901090214430
Pris: 6825kr
Factory rear wheel 2.15x18"
Anodised hub milled from a whole piece Maximum weight saving compared to standard wheels Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodised aluminum spoke nipples Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 18
Visa hela beskrivningen
Anodised hub milled from a whole piece Maximum weight saving compared to standard wheels Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodised aluminum spoke nipples Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 18
Torque wrench
00029996000
Spoke torque wrench
A46019909000
rear rim 2,15x18 DID
8121007010030A
SPOKE M4,5X193-18 BLACK 1
7901007119330
7901090114430
Pris: 6825kr
Factory rear wheel 2.15x19"
Anodised hub milled from a whole piece Maximum weight saving compared to standard wheels Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodised aluminum spoke nipples Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 19
Visa hela beskrivningen
Anodised hub milled from a whole piece Maximum weight saving compared to standard wheels Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodised aluminum spoke nipples Approvals: HOMNN_EU Colour: Black Surface (PowerParts): Anodized Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 19
Torque wrench
00029996000
Spoke torque wrench
A46019909000
rim 2,15x19 DID
2501007000030A
SPOKE M4,5X205-19 BLACK 1
7901007120530
54809081060
Pris: 325kr
Front axle puller
Simplifies removal of the front wheel. For all front axles with a 26 mm diameter.
Simplifies removal of the front wheel. For all front axles with a 26 mm diameter.
48601627
Pris: 60kr
Valve cap
Approvals: HOMNN_EU Colour: Silver Material (PowerParts): Aluminium Type: Kein Fahrzeug
Approvals: HOMNN_EU Colour: Silver Material (PowerParts): Aluminium Type: Kein Fahrzeug
7771097615004
Pris: 110kr
Valve cap set
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
7771097605004
Pris: 175kr
Valve cap set
Anodised valve caps With valve opener function Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
Anodised valve caps With valve opener function Approvals: HOMNN_EU Colour: Orange Surface (PowerParts): Anodized Material (PowerParts): Aluminium
78009099000
Pris: 345kr
Wheel rim sticker kit
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
Approvals: HOMNN_EU Colour: Orange
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
Approvals: HOMNN_EU Colour: Orange
78109999000
Pris: 345kr
Wheel rim sticker kit
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
Approvals: HOMNN_EU Colour: Black
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
Approvals: HOMNN_EU Colour: Black
79109999000
Pris: 345kr
Wheel rim sticker kit
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
Pre-cut stickers Suitable for front and rear wheel rim For wheel size 18/21"; 19/21"
2610900104430
Pris: 6795kr
Front wheel 3.5x16.5"
comes with bushings for 26mm axle diameter can be adapted to other axle diameter by using the bike's stock bushings
Approvals: CCCUO_EU Colour: Black Material (PowerParts): Aluminium Alignment: Front Wheel Size: 16.5
Visa hela beskrivningen
comes with bushings for 26mm axle diameter can be adapted to other axle diameter by using the bike's stock bushings
Approvals: CCCUO_EU Colour: Black Material (PowerParts): Aluminium Alignment: Front Wheel Size: 16.5
Rear wheel 5x17"
2611000104430
FRONT WHEEL HUB CPL.
78009010144
RIM FRONT 3,50X16,5 BLACK
2610907000030
2611000104430
Pris: 7915kr
Rear wheel 5x17"
comes with bushings for 20mm axle diameter can be adapted to other axle diameter by using the bike's stock bushings
Approvals: CCCUO_EU Colour: Black Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 17
Visa hela beskrivningen
comes with bushings for 20mm axle diameter can be adapted to other axle diameter by using the bike's stock bushings
Approvals: CCCUO_EU Colour: Black Material (PowerParts): Aluminium Alignment: Rear Wheel Size: 17
Front wheel 3.5x16.5"
2610900104430
SPOKE NIPPLE M4,5X0,75
26110072000
SPOKE M4,5X159 - 17
26110071159
SPOKE M4,5X154 - 17
26110071154
RIM REAR 5X17 BLACK
2611007000030
REAR WHEEL HUB CPL. 2013
25010010144
00029013005
Pris: 450kr
Bleeder cover
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Bleeding device
00029013100
00029013006
Pris: 710kr
Bleeder cover
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Adapter for hand or foot brake cylinder, for filling or bleeding the brake system
Bleeding device
00029013100
00029013100
Pris: 9335kr
Bleeding device
Tool for servicing hydraulic brake systems
Tool for servicing hydraulic brake systems
Bleeder cover
00029013002
Bleeder cover
00029013004
Bleeder cover
00029013005
Bleeder cover
00029013006
Bleeder cover
00029013009
Bleeder cover
00029013010
Bleeder cover
00029013012
Bleeder cover
00029013013
Bleeder cover
00029013014
Bleeder cover
00029013015
Bleeder cover
00029013017
Bleeder cover
00029013018
Bleeder cover
00029013023
75029047000
Pris: 4185kr
Crankshaft pressing tool
Tool for pressing the crankshaft together
Tool for pressing the crankshaft together
Insert for crankshaft pressing tool
54829108000
Cover for crankshaft pressing tool
76629047003
Insert for crankshaft pressing tool
77029008000
Insert for crankshaft pressing tool
77229008000
Insert for crankshaft pressing tool
77729008000
Insert for crankshaft pressing tool
78029008000
Insert for crankshaft pressing tool
78929008000
Insert for crankshaft pressing tool
79029008000
Insert for crankshaft pressing tool
79029108000
Insert for crankshaft pressing tool
79429008000
77229008000
Pris: 1405kr
Insert for crankshaft pressing tool
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
Crankshaft pressing tool
75029047000
77229009000
Pris: 830kr
Separator plate
Tool for separating the crankshaft
Tool for separating the crankshaft
77229032000
Pris: 355kr
Separator plate
Tool for pressing out balancer shaft drive gear wheel
Tool for pressing out balancer shaft drive gear wheel
00029014000
Pris: 9835kr
Cable connector unlocking kit
Pinout kit including case and crimping pliers for repairing wiring harnesses or replacing the most common connectors
Pinout kit including case and crimping pliers for repairing wiring harnesses or replacing the most common connectors
00029095050
Pris: 11620kr
EU battery charger
Specially designed battery charger for the correct charging of various 12-V batteries (acid, AGM and lithium-ion), backup operation with diagnosis and flash operations, refresh function at deep discharge, initial charge for the activation of dry batteries, the software can be updated using a dongle
Alternativartikel: 00029095051 Type: Recommended Technical Details: Power cable length approx.: 5 m (16 ft)
Visa hela beskrivningen
Specially designed battery charger for the correct charging of various 12-V batteries (acid, AGM and lithium-ion), backup operation with diagnosis and flash operations, refresh function at deep discharge, initial charge for the activation of dry batteries, the software can be updated using a dongle
Alternativartikel: 00029095051 Type: Recommended Technical Details: Power cable length approx.: 5 m (16 ft)
61229001000
Pris: 16645kr
Engine work stand
Tool (including chassis, crank rotation mechanism, oil pan, and engine bracket) for mounting the removed engine
Tool (including chassis, crank rotation mechanism, oil pan, and engine bracket) for mounting the removed engine
77229002000
Pris: 580kr
Holder and fitting for work stand
Tool for securing the removed engine on the engine work stand
Tool for securing the removed engine on the engine work stand
Engine work stand
61229001000
58429037037
Pris: 525kr
Puller
Tool for pulling off components (inner bearing race of crankshaft)
Type: Mandatory Technical Details: Inside diameter: 37.5 mm (1.476 in)
Tool for pulling off components (inner bearing race of crankshaft)
Type: Mandatory Technical Details: Inside diameter: 37.5 mm (1.476 in)
58012009000
Pris: 275kr
Puller
Tool for pulling off components (rotor)
Tool for pulling off components (rotor)
77229001044
Pris: 745kr
Puller
Tool for pulling off components (camshaft gear wheel)
Tool for pulling off components (camshaft gear wheel)
77229048000
Pris: 905kr
Puller
Tool for disengaging components (sections of the engine case)
Tool for disengaging components (sections of the engine case)
46129021000
Pris: 1580kr
Puller
Tool for pulling off components (primary gear wheel, sleeve, main shaft, rotor)
Tool for pulling off components (primary gear wheel, sleeve, main shaft, rotor)
T14021
Pris: 275kr
Calibrating unit
Tool for calibrating components (DU bush)
Type: Recommended Technical Details: Diameter: 12 mm (0.47 in)
Tool for calibrating components (DU bush)
Type: Recommended Technical Details: Diameter: 12 mm (0.47 in)
T14049S
Pris: 465kr
Clamping stand
Tool for clamping components (piston rod, cartridge)
Type: Recommended Technical Details: Diameter: 24.8 mm (0.976 in)
Tool for clamping components (piston rod, cartridge)
Type: Recommended Technical Details: Diameter: 24.8 mm (0.976 in)
T14016S
Pris: 330kr
Clamping stand
Tool for clamping components (piston rod)
Type: Recommended Technical Details: Diameter: 12 mm (0.47 in)
Tool for clamping components (piston rod)
Type: Recommended Technical Details: Diameter: 12 mm (0.47 in)
T120
Pris: 475kr
Drift
Tool for driving components out (collar bushings)
Type: Recommended Technical Details: Diameter: 8 mm (0.31 in)
Tool for driving components out (collar bushings)
Type: Recommended Technical Details: Diameter: 8 mm (0.31 in)
T14030
Pris: 275kr
Filling adapter
Tool for bleeding and filling cartridge
Type: Repair Technical Details: Diameter: 16 mm (0.63 in)
Tool for bleeding and filling cartridge
Type: Repair Technical Details: Diameter: 16 mm (0.63 in)
T14019
Pris: 790kr
Filling tool
Tool for filling the cartridge with nitrogen
Tool for filling the cartridge with nitrogen
T14029
Pris: 385kr
Mounting sleeve
Tool for mounting components (seal ring)
Type: Recommended Technical Details: Diameter: 12.45 mm (0.4902 in)
Tool for mounting components (seal ring)
Type: Recommended Technical Details: Diameter: 12.45 mm (0.4902 in)
T14040S
Pris: 830kr
Mounting tool
Tool for holding when assembling fork legs
Type: Kein Fahrzeug Technical Details: Diameter: 48 mm (1.89 in)
Tool for holding when assembling fork legs
Type: Kein Fahrzeug Technical Details: Diameter: 48 mm (1.89 in)
T103
Pris: 385kr
Pin wrench
Tool for working on the piston rod (spring holder sheet, preload adjuster)
Type: Recommended Technical Details: Adjustable
Tool for working on the piston rod (spring holder sheet, preload adjuster)
Type: Recommended Technical Details: Adjustable
T14022B
Pris: 355kr
Pressing tool
Tool for removing and installing components (DU bush)
Type: Recommended Technical Details: Diameter: 11.95 … 21.4 mm (0.4705 … 0.843 in)
Tool for removing and installing components (DU bush)
Type: Recommended Technical Details: Diameter: 11.95 … 21.4 mm (0.4705 … 0.843 in)
T14051
Pris: 600kr
Pressing tool
Tool for removing the cartridge from the fork leg
Type: Recommended Technical Details: Diameter: 27.5 mm (1.083 in)
Tool for removing the cartridge from the fork leg
Type: Recommended Technical Details: Diameter: 27.5 mm (1.083 in)
T1401
Pris: 310kr
Protecting sleeve
Tool for protecting components (inside fork tube)
Type: Recommended Technical Details: Diameter: 48 mm (1.89 in)
Tool for protecting components (inside fork tube)
Type: Recommended Technical Details: Diameter: 48 mm (1.89 in)
T14017
Pris: 910kr
Ring wrench
Tool for loosening and tightening components (screw cap)
Type: Recommended Technical Details: Hexagonal part: 50 mm (1.97 in)
Tool for loosening and tightening components (screw cap)
Type: Recommended Technical Details: Hexagonal part: 50 mm (1.97 in)
T14020
Pris: 195kr
Support tool
Tool for holding the piston rod
Tool for holding the piston rod
T14023
Pris: 170kr
Thread protection sleeve
Tool for protecting components (thread of screw sleeve)
Type: Recommended Technical Details: Diameter: 24.5 mm (0.965 in)
Tool for protecting components (thread of screw sleeve)
Type: Recommended Technical Details: Diameter: 24.5 mm (0.965 in)
T14033
Pris: 400kr
Tweezers
Tool for mounting components (check valve)
Tool for mounting components (check valve)
60029012000
Pris: 180kr
clearance gauge
Tool for measuring bearing play
Type: Recommended Technical Details: 0.025 … 0.175 mm (0.00098 … 0.00689 in)
Tool for measuring bearing play
Type: Recommended Technical Details: 0.025 … 0.175 mm (0.00098 … 0.00689 in)
60029010000
Pris: 2855kr
Angle disc
Tool for tightening bolts with rotation angle (cylinder head nuts, conrod bearing bolts)
Type: Recommended Technical Details: Driver system / tip: 1/2 in
Tool for tightening bolts with rotation angle (cylinder head nuts, conrod bearing bolts)
Type: Recommended Technical Details: Driver system / tip: 1/2 in
77329006000
Pris: 570kr
Oil pressure adapter
Adapter for pressure testing tool, for checking oil pressure
Adapter for pressure testing tool, for checking oil pressure
Pressure testing tool
61029094000
61029094000
Pris: 2535kr
Pressure testing tool
Tool for checking fuel and oil pressure
Tool for checking fuel and oil pressure
Oil pressure adapter
75029094000
Oil pressure adapter
77329006000
Oil pressure adapter
79429094000
Oil pressure adapter
90129094000
61029093000
Pris: 2175kr
Testing hose
Hose for pressure testing tool, for checking the fuel pressure
Hose for pressure testing tool, for checking the fuel pressure
Pressure testing tool
61029094000
58429094000
Pris: 5140kr
Torque wrench kit
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
Type: Recommended Technical Details: Bit diameter: 5.9 mm (0.232 in)
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
Type: Recommended Technical Details: Bit diameter: 5.9 mm (0.232 in)
Bit for torque wrench
58429094100
50329050000
Pris: 245kr
Syringe
Tool for extracting and adding liquids
Tool for extracting and adding liquids
77229030000
Pris: 415kr
Insertion for piston ring lock
Tool for installing the piston ring lock in the piston
Tool for installing the piston ring lock in the piston
60029015000
Pris: 625kr
Piston ring compressor
Tool for tensioning piston rings when installing the piston in the cylinder
Type: Recommended Technical Details: Diameter: 57 … 125 mm (2.24 … 4.92 in)
Tool for tensioning piston rings when installing the piston in the cylinder
Type: Recommended Technical Details: Diameter: 57 … 125 mm (2.24 … 4.92 in)
60029057000
Pris: 1035kr
Hose clamp pliers
Tool for mounting hose clamps
Tool for mounting hose clamps
51012011000
Pris: 425kr
Lock ring plier
Tool for removing the oil filter
Tool for removing the oil filter
77229010000
Pris: 1195kr
Valve stem seals plier
Tool for removing valve stem seals
Tool for removing valve stem seals
58429091000
Pris: 260kr
Pressing tool
Tool for pressing components in (bearing rings when changing steering head bearing)
Tool for pressing components in (bearing rings when changing steering head bearing)
58429092000
Pris: 270kr
Pressing tool
Tool for pressing components out (bearing rings when changing steering head bearing)
Tool for pressing components out (bearing rings when changing steering head bearing)
58429089000
Pris: 235kr
Tool bracket
Tool for pressing components in and out (bearing rings when changing steering head bearing)
Tool for pressing components in and out (bearing rings when changing steering head bearing)
Pressing tool
58429091000
Pressing tool
58429092000
75029090000
Pris: 140kr
Protection cap
Tool for protecting components (removal of primary gear wheel)
Tool for protecting components (removal of primary gear wheel)
77229031000
Pris: 210kr
Protection cap
Tool for protecting components (removal of balancer shaft drive gear wheel)
Tool for protecting components (removal of balancer shaft drive gear wheel)
T106S
Pris: 445kr
Hook wrench
Tool for tensioning and releasing the springs (two units)
Type: Recommended Technical Details: Diameter: 68 … 75 mm (2.68 … 2.95 in)
Tool for tensioning and releasing the springs (two units)
Type: Recommended Technical Details: Diameter: 68 … 75 mm (2.68 … 2.95 in)
T1215
Pris: 235kr
Mounting sleeve
Tool for mounting components (seal ring retainer of piston rod)
Type: Recommended Technical Details: Diameter: 18 mm (0.71 in)
Tool for mounting components (seal ring retainer of piston rod)
Type: Recommended Technical Details: Diameter: 18 mm (0.71 in)
T1504
Pris: 310kr
Pressing tool
Tool for positioning components (DU bush in seal ring retainer)
Type: Recommended Technical Details: Diameter: 18 mm (0.71 in)
Tool for positioning components (DU bush in seal ring retainer)
Type: Recommended Technical Details: Diameter: 18 mm (0.71 in)
T15085
Pris: 43990kr
Vacuum pump
220 Volt For all WP-shocks Two 3 litre tanks Fill two different shocks at the same time Programmable filling cycle time Two filling presets Intuitive control via a 4.3" LCD screen Low oil warning Vacuum 42L/min Max. vacuum -0,98 bar Adjustable pressure 1,5-3 bar Incl. 2 WP-adapters
Approvals: HOMNN_EU Type: Kein Fahrzeug
Visa hela beskrivningen
220 Volt For all WP-shocks Two 3 litre tanks Fill two different shocks at the same time Programmable filling cycle time Two filling presets Intuitive control via a 4.3" LCD screen Low oil warning Vacuum 42L/min Max. vacuum -0,98 bar Adjustable pressure 1,5-3 bar Incl. 2 WP-adapters
Approvals: HOMNN_EU Type: Kein Fahrzeug
77229172000
Pris: 850kr
Spark plug wrench with link
Tool for removing and installing spark plugs
Type: Recommended Technical Details: Hexagonal part: 14 mm (0.55 in)
Tool for removing and installing spark plugs
Type: Recommended Technical Details: Hexagonal part: 14 mm (0.55 in)
59029003100
Pris: 240kr
Holding wrench
Tool for holding components (clutch)
Tool for holding components (clutch)
80029003000
Pris: 305kr
Holding wrench
Tool for holding components (clutch)
Tool for holding components (clutch)
77229050044
Pris: 865kr
Adjustment bush bridge
Tool for working on camshaft (changing camshaft bearing, checking and adjusting valve timing)
Tool for working on camshaft (changing camshaft bearing, checking and adjusting valve timing)
77229060000
Pris: 295kr
Insert for valve spring lever
Tool for installing and removing valves and valve springs
Tool for installing and removing valves and valve springs
Valve spring mounter
59029019000
77229026000
Pris: 305kr
Limit plug gauge
Tool for checking valve guides
Type: Recommended Technical Details: Diameter: 5.55 mm (0.2185 in)
Tool for checking valve guides
Type: Recommended Technical Details: Diameter: 5.55 mm (0.2185 in)
61229021000
Pris: 355kr
Release device for timing chain tensioner
Tool for installing timing chain tensioner
Tool for installing timing chain tensioner
77229035000
Pris: 360kr
Timing chain tensioner insert
Tool for tensioning timing chain
Tool for tensioning timing chain
59029019000
Pris: 1105kr
Valve spring mounter
Tool for installing and removing valves and valve springs
Tool for installing and removing valves and valve springs
Insert for valve spring lever
63529060000
Insert for valve spring lever
77029041200
Insert for valve spring lever
77229060000
Insert for valve spring lever
78029060000
Insert for valve spring lever
79029060000
Insert for valve spring lever
90129060000